FormulaDen.com

Physics Chemistry Math Chemical Engineering Civil Electrical Electronics Electronics and Instrumentation Materials Science Mechanical Production Engineering Financial Health

Correction for Mutual Interference of Pile Formula

Fx Copy

LaTeX Copy

Correction to be applied as percentage of head. Check FAQs

C = 19 \cdot \sqrt{\frac{D}{b'}} \cdot (\frac{d pile + D}{b})

C - Correction to be Applied as Percentage of Head?D - Depth of Pile Effect is Required on Neighbor Pile?b^' - Distance Between the Piles?d_pile - Depth of Pile on Which Effect on Neighbor Pile?b - Total Length of Floor?

Correction for Mutual Interference of Pile Example

With values

With units

Only example

Here is how the Correction for Mutual Interference of Pile equation looks like with Values.

Here is how the Correction for Mutual Interference of Pile equation looks like with Units.

Here is how the Correction for Mutual Interference of Pile equation looks like.

2.3296 = 19 \cdot \sqrt{\frac{7}{15.8}} \cdot (\frac{3.5 + 7}{57})

2.3296 = 19 \cdot \sqrt{\frac{7m}{15.8m}} \cdot (\frac{3.5m + 7m}{57m})

2.3296 = 19 \cdot \sqrt{\frac{7}{15.8}} \cdot (\frac{3.5 + 7}{57})

Tip: Use pencil ( Pencil

) icon above to edit Input Values and Units.

Calculate

Recalculate

Solution

Copy

Reset

You are here -

Home » Category

Engineering » Category

Civil » Category

Irrigation Engineering » fx Correction for Mutual Interference of Pile

Correction for Mutual Interference of Pile Solution

Follow our step by step solution on how to calculate Correction for Mutual Interference of Pile?

FIRST Step Consider the formula

C = 19 \cdot \sqrt{\frac{D}{b'}} \cdot (\frac{d pile + D}{b})

Next Step Substitute values of Variables

∴

C = 19 \cdot \sqrt{\frac{7m}{15.8m}} \cdot (\frac{3.5m + 7m}{57m})

Next Step Prepare to Evaluate

∴

C = 19 \cdot \sqrt{\frac{7}{15.8}} \cdot (\frac{3.5 + 7}{57})

Next Step Evaluate

∴

C = 2.32963842470745

LAST Step Rounding Answer

∴

C = 2.3296

Correction for Mutual Interference of Pile Formula Elements

Variables

Functions

Correction to be Applied as Percentage of Head

Correction to be applied as percentage of head.

Symbol: C

Measurement: NAUnit: Unitless

Note: Value should be greater than 0.

Formulas to find Correction to be Applied as Percentage of Head

Depth of Pile Effect is Required on Neighbor Pile

Depth of pile effect is required on neighbor pile.

Symbol: D

Measurement: LengthUnit: m

Note: Value should be greater than 0.

Formulas to find Depth of Pile Effect is Required on Neighbor Pile

Distance Between the Piles

Distance between the piles of two lines.

Symbol: b^'

Measurement: LengthUnit: m

Note: Value should be greater than 0.

Formulas to find Distance Between the Piles

Depth of Pile on Which Effect on Neighbor Pile

Depth of pile on which effect on neighbor pile.

Symbol: d_pile

Measurement: LengthUnit: m

Note: Value can be positive or negative.

Formulas to find Depth of Pile on Which Effect on Neighbor Pile

Total Length of Floor

Total length of floor used for describing drapes that reach the floor.

Symbol: b

Measurement: LengthUnit: m

Note: Value should be greater than 0.

Formulas to find Total Length of Floor

sqrt

A square root function is a function that takes a non-negative number as an input and returns the square root of the given input number.

Syntax: sqrt(Number)

Other formulas in Khosla's Theory category

Go Khosla Derived Expression for Exit Gradient

G E = (\frac{H}{d}) \cdot (\frac{1}{3.14 \cdot \sqrt{λ}})

How to Evaluate Correction for Mutual Interference of Pile?

Correction for Mutual Interference of Pile evaluator uses Correction to be Applied as Percentage of Head = 19*sqrt(Depth of Pile Effect is Required on Neighbor Pile/Distance Between the Piles)*((Depth of Pile on Which Effect on Neighbor Pile+Depth of Pile Effect is Required on Neighbor Pile)/Total Length of Floor) to evaluate the Correction to be Applied as Percentage of Head, The Correction for Mutual Interference of Pile formula is defined as this correction is positive when the point is considered to be at the rear of the interfering pile and negative for points considered in the forward or flow direction with the interfering pile. Correction to be Applied as Percentage of Head is denoted by C symbol.

How to evaluate Correction for Mutual Interference of Pile using this online evaluator? To use this online evaluator for Correction for Mutual Interference of Pile, enter Depth of Pile Effect is Required on Neighbor Pile (D), Distance Between the Piles (b^'), Depth of Pile on Which Effect on Neighbor Pile (d_pile) & Total Length of Floor (b) and hit the calculate button.

FAQs on Correction for Mutual Interference of Pile

What is the formula to find Correction for Mutual Interference of Pile?

The formula of Correction for Mutual Interference of Pile is expressed as Correction to be Applied as Percentage of Head = 19*sqrt(Depth of Pile Effect is Required on Neighbor Pile/Distance Between the Piles)*((Depth of Pile on Which Effect on Neighbor Pile+Depth of Pile Effect is Required on Neighbor Pile)/Total Length of Floor). Here is an example- 2.329638 = 19*sqrt(7/15.8)*((3.5+7)/57).

How to calculate Correction for Mutual Interference of Pile?

With Depth of Pile Effect is Required on Neighbor Pile (D), Distance Between the Piles (b^'), Depth of Pile on Which Effect on Neighbor Pile (d_pile) & Total Length of Floor (b) we can find Correction for Mutual Interference of Pile using the formula - Correction to be Applied as Percentage of Head = 19*sqrt(Depth of Pile Effect is Required on Neighbor Pile/Distance Between the Piles)*((Depth of Pile on Which Effect on Neighbor Pile+Depth of Pile Effect is Required on Neighbor Pile)/Total Length of Floor). This formula also uses Square Root (sqrt) function(s).

Let Others Know

✖

Facebook

Twitter

Copied!

: Value
: Unit

Correction for Mutual Interference of Pile Formula

Correction for Mutual Interference of Pile Example

Correction for Mutual Interference of Pile Solution

Correction for Mutual Interference of Pile Formula Elements

Other formulas in Khosla's Theory category

How to Evaluate Correction for Mutual Interference of Pile?

FAQs on Correction for Mutual Interference of Pile

Variable Name