FormulaDen.com

Physics Chemistry Math Chemical Engineering Civil Electrical Electronics Electronics and Instrumentation Materials Science Mechanical Production Engineering Financial Health

Correction Factor for Partial Penetration given Discharge for Fully Penetrating Well Formula

GoCorrection Factor for Partial Penetration given Discharge for Partially Penetrating Well Formula

Fx Copy

LaTeX Copy

Correction Factor refers to the reduced efficiency and altered flow patterns due to the well not extending through the entire aquifer thickness. Check FAQs

G = \frac{Q v}{Q fe}

G - Correction Factor?Q_v - Discharge for Partially Penetrating Well?Q_fe - Discharge for Fully Penetrating Gravity Well?

Correction Factor for Partial Penetration given Discharge for Fully Penetrating Well Example

With values

With units

Only example

Here is how the Correction Factor for Partial Penetration given Discharge for Fully Penetrating Well equation looks like with Values.

Here is how the Correction Factor for Partial Penetration given Discharge for Fully Penetrating Well equation looks like with Units.

Here is how the Correction Factor for Partial Penetration given Discharge for Fully Penetrating Well equation looks like.

0.8301 = \frac{5.08}{6.12}

0.8301 = \frac{5.08m³/s}{6.12m³/s}

0.8301 = \frac{5.08}{6.12}

Tip: Use pencil ( Pencil

) icon above to edit Input Values and Units.

Calculate

Recalculate

Solution

Copy

Reset

You are here -

Home » Category

Engineering » Category

Civil » Category

Environmental Engineering » fx Correction Factor for Partial Penetration given Discharge for Fully Penetrating Well

Correction Factor for Partial Penetration given Discharge for Fully Penetrating Well Solution

Follow our step by step solution on how to calculate Correction Factor for Partial Penetration given Discharge for Fully Penetrating Well?

FIRST Step Consider the formula

G = \frac{Q v}{Q fe}

Next Step Substitute values of Variables

∴

G = \frac{5.08m³/s}{6.12m³/s}

Next Step Prepare to Evaluate

∴

G = \frac{5.08}{6.12}

Next Step Evaluate

∴

G = 0.830065359477124

LAST Step Rounding Answer

∴

G = 0.8301

Correction Factor for Partial Penetration given Discharge for Fully Penetrating Well Formula Elements

Variables

Correction Factor

Correction Factor refers to the reduced efficiency and altered flow patterns due to the well not extending through the entire aquifer thickness.

Symbol: G

Measurement: NAUnit: Unitless

Note: Value should be greater than 0.

Formulas to find Correction Factor

Discharge for Partially Penetrating Well

Discharge for Partially Penetrating Well refers to the volume of water extracted from an aquifer when the well does not extend through the entire thickness of the aquifer.

Symbol: Q_v

Measurement: Volumetric Flow RateUnit: m³/s

Note: Value should be greater than 0.

Formulas to find Discharge for Partially Penetrating Well

Discharge for Fully Penetrating Gravity Well

Discharge for Fully Penetrating Gravity Well refers to the volume of water extracted from an unconfined aquifer where the well reaches the entire thickness of the aquifer.

Symbol: Q_fe

Measurement: Volumetric Flow RateUnit: m³/s

Note: Value should be greater than 0.

Formulas to find Discharge for Fully Penetrating Gravity Well

Other Formulas to find Correction Factor

Go Correction Factor for Partial Penetration given Discharge for Partially Penetrating Well

G = \frac{Q v}{\frac{2 \cdot π \cdot K \cdot b \cdot (H - h w)}{\log ((\frac{R}{r}), e)}}

Other formulas in Partially Penetrating Artesian Well category

Go Discharge for Partially Penetrating Well

Q v = \frac{2 \cdot π \cdot K \cdot b \cdot (H - h w) \cdot G}{\log ((\frac{R}{r}), e)}

Go Coefficient of Permeability given Discharge for Partially Penetrating Well

K = \frac{Q v}{\frac{2 \cdot π \cdot b \cdot (H - h w) \cdot G}{\log ((\frac{R}{r}), e)}}

Go Aquifer Thickness given Discharge for Partially Penetrating Well

b = \frac{Q v}{\frac{2 \cdot π \cdot K \cdot (H - h w) \cdot G}{\log ((\frac{R}{r}), e)}}

Go Thickness of Aquifer given Discharge for Partially Penetrating Well

H = h w + \frac{Q v \cdot (\log ((\frac{R}{r}), e))}{2 \cdot π \cdot K \cdot b \cdot G}

How to Evaluate Correction Factor for Partial Penetration given Discharge for Fully Penetrating Well?

Correction Factor for Partial Penetration given Discharge for Fully Penetrating Well evaluator uses Correction Factor = Discharge for Partially Penetrating Well/Discharge for Fully Penetrating Gravity Well to evaluate the Correction Factor, Correction Factor for Partial Penetration given Discharge for Fully Penetrating Well formula is defined as a dimensionless quantity that accounts for the reduction in well discharge due to partial penetration of the well screen into the aquifer, providing a correction to the discharge rate of a fully penetrating well. Correction Factor is denoted by G symbol.

How to evaluate Correction Factor for Partial Penetration given Discharge for Fully Penetrating Well using this online evaluator? To use this online evaluator for Correction Factor for Partial Penetration given Discharge for Fully Penetrating Well, enter Discharge for Partially Penetrating Well (Q_v) & Discharge for Fully Penetrating Gravity Well (Q_fe) and hit the calculate button.

FAQs on Correction Factor for Partial Penetration given Discharge for Fully Penetrating Well

What is the formula to find Correction Factor for Partial Penetration given Discharge for Fully Penetrating Well?

The formula of Correction Factor for Partial Penetration given Discharge for Fully Penetrating Well is expressed as Correction Factor = Discharge for Partially Penetrating Well/Discharge for Fully Penetrating Gravity Well. Here is an example- 10160 = 5.08/6.12.

How to calculate Correction Factor for Partial Penetration given Discharge for Fully Penetrating Well?

With Discharge for Partially Penetrating Well (Q_v) & Discharge for Fully Penetrating Gravity Well (Q_fe) we can find Correction Factor for Partial Penetration given Discharge for Fully Penetrating Well using the formula - Correction Factor = Discharge for Partially Penetrating Well/Discharge for Fully Penetrating Gravity Well.

What are the other ways to Calculate Correction Factor?

Here are the different ways to Calculate Correction Factor-

Correction Factor=Discharge for Partially Penetrating Well/((2*pi*Coefficient of Permeability*Aquifer Thickness*(Initial Piezometric Surface-Depth of Water))/(log((Radius of Influence/Radius of Well),e)))

Let Others Know

✖

Facebook

Twitter

Copied!

: Value
: Unit

Correction Factor for Partial Penetration given Discharge for Fully Penetrating Well Formula

​GoCorrection Factor for Partial Penetration given Discharge for Partially Penetrating Well Formula

Correction Factor for Partial Penetration given Discharge for Fully Penetrating Well Example

Correction Factor for Partial Penetration given Discharge for Fully Penetrating Well Solution

Correction Factor for Partial Penetration given Discharge for Fully Penetrating Well Formula Elements

Other Formulas to find Correction Factor

Other formulas in Partially Penetrating Artesian Well category

How to Evaluate Correction Factor for Partial Penetration given Discharge for Fully Penetrating Well?

FAQs on Correction Factor for Partial Penetration given Discharge for Fully Penetrating Well

Variable Name

GoCorrection Factor for Partial Penetration given Discharge for Partially Penetrating Well Formula