FormulaDen.com

Physics Chemistry Math Chemical Engineering Civil Electrical Electronics Electronics and Instrumentation Materials Science Mechanical Production Engineering Financial Health

Corner Radius of Tool given Machining Time Formula

Fx Copy

LaTeX Copy

Corner Radius of Tool is a measurement describing the curve on the corners of labels. Check FAQs

r E = \frac{{(0.18 \cdot \frac{L}{n w \cdot t m})}^{2}}{R a}

r_E - Corner Radius of Tool?L - Length of Workpiece?n_w - Rotational Frequency of Spindle?t_m - Machining Time?R_a - Roughness Value?

Corner Radius of Tool given Machining Time Example

With values

With units

Only example

Here is how the Corner Radius of Tool given Machining Time equation looks like with Values.

Here is how the Corner Radius of Tool given Machining Time equation looks like with Units.

Here is how the Corner Radius of Tool given Machining Time equation looks like.

1.497 = \frac{{(0.18 \cdot \frac{400}{10.01 \cdot 0.74})}^{2}}{0.0175}

1.497mm = \frac{{(0.18 \cdot \frac{400mm}{10.01Hz \cdot 0.74min})}^{2}}{0.0175mm}

1.497 = \frac{{(0.18 \cdot \frac{400}{10.01 \cdot 0.74})}^{2}}{0.0175}

Tip: Use pencil ( Pencil

) icon above to edit Input Values and Units.

Calculate

Recalculate

Solution

Copy

Reset

You are here -

Home » Category

Engineering » Category

Production Engineering » Category

Metal Machining » fx Corner Radius of Tool given Machining Time

Corner Radius of Tool given Machining Time Solution

Follow our step by step solution on how to calculate Corner Radius of Tool given Machining Time?

FIRST Step Consider the formula

r E = \frac{{(0.18 \cdot \frac{L}{n w \cdot t m})}^{2}}{R a}

Next Step Substitute values of Variables

∴

r E = \frac{{(0.18 \cdot \frac{400mm}{10.01Hz \cdot 0.74min})}^{2}}{0.0175mm}

Next Step Convert Units

∴

r E = \frac{{(0.18 \cdot \frac{0.4m}{10.01Hz \cdot 44.4s})}^{2}}{1.8E-5m}

Next Step Prepare to Evaluate

∴

r E = \frac{{(0.18 \cdot \frac{0.4}{10.01 \cdot 44.4})}^{2}}{1.8E-5}

Next Step Evaluate

∴

r E = 0.00149700530788249m

Next Step Convert to Output's Unit

∴

r E = 1.49700530788249mm

LAST Step Rounding Answer

∴

r E = 1.497mm

Corner Radius of Tool given Machining Time Formula Elements

Variables

Corner Radius of Tool

Corner Radius of Tool is a measurement describing the curve on the corners of labels.

Symbol: r_E

Measurement: LengthUnit: mm

Note: Value should be greater than 0.

Formulas to find Corner Radius of Tool

Length of Workpiece

Length of Workpiece is the measurement or extent of Workpiece from end to end in the direction of Cut.

Symbol: L

Measurement: LengthUnit: mm

Note: Value should be greater than 0.

Formulas to find Length of Workpiece

Rotational Frequency of Spindle

Rotational Frequency of Spindle is the number of turns made by the spindle of the machine for cutting in one second.

Symbol: n_w

Measurement: FrequencyUnit: Hz

Note: Value should be greater than 0.

Formulas to find Rotational Frequency of Spindle

Machining Time

Machining Time is the time when a machine is actually processing something. Generally, machining time is the term used when there is a removal of unwanted material.

Symbol: t_m

Measurement: TimeUnit: min

Note: Value should be greater than 0.

Formulas to find Machining Time

Roughness Value

Roughness Value is the arithmetic average of the absolute values of the roughness profile ordinates.

Symbol: R_a

Measurement: LengthUnit: mm

Note: Value should be greater than 0.

Formulas to find Roughness Value

Other formulas in Accuracy and Surface Finish category

Go Feed to Workpiece given Machining Time

f = \frac{L}{t m \cdot n w}

Go Length of Workpiece given Machining Time

L = t m \cdot f \cdot n w

Go Rotational Frequency of Workpiece given Machining Time

n w = \frac{L}{t m \cdot f}

Go Machining Time for Workpiece given Machining Conditions

t m = \frac{L}{f \cdot n w}

How to Evaluate Corner Radius of Tool given Machining Time?

Corner Radius of Tool given Machining Time evaluator uses Corner Radius of Tool = ((0.18*Length of Workpiece/(Rotational Frequency of Spindle*Machining Time))^2)/Roughness Value to evaluate the Corner Radius of Tool, The Corner Radius of Tool given Machining Time is a method to determine the measurement describing the curve on the corners of the Cutting Edge of the tool when Machining Time for the tool on a single component is known. Corner Radius of Tool is denoted by r_E symbol.

How to evaluate Corner Radius of Tool given Machining Time using this online evaluator? To use this online evaluator for Corner Radius of Tool given Machining Time, enter Length of Workpiece (L), Rotational Frequency of Spindle (n_w), Machining Time (t_m) & Roughness Value (R_a) and hit the calculate button.

FAQs on Corner Radius of Tool given Machining Time

What is the formula to find Corner Radius of Tool given Machining Time?

The formula of Corner Radius of Tool given Machining Time is expressed as Corner Radius of Tool = ((0.18*Length of Workpiece/(Rotational Frequency of Spindle*Machining Time))^2)/Roughness Value. Here is an example- 1497.005 = ((0.18*0.4/(10.01001*44.4))^2)/1.7531E-05.

How to calculate Corner Radius of Tool given Machining Time?

With Length of Workpiece (L), Rotational Frequency of Spindle (n_w), Machining Time (t_m) & Roughness Value (R_a) we can find Corner Radius of Tool given Machining Time using the formula - Corner Radius of Tool = ((0.18*Length of Workpiece/(Rotational Frequency of Spindle*Machining Time))^2)/Roughness Value.

Can the Corner Radius of Tool given Machining Time be negative?

No, the Corner Radius of Tool given Machining Time, measured in Length cannot be negative.

Which unit is used to measure Corner Radius of Tool given Machining Time?

Corner Radius of Tool given Machining Time is usually measured using the Millimeter[mm] for Length. Meter[mm], Kilometer[mm], Decimeter[mm] are the few other units in which Corner Radius of Tool given Machining Time can be measured.

Let Others Know

✖

Facebook

Twitter

Copied!

Corner Radius of Tool given Machining Time Formula

Corner Radius of Tool given Machining Time Example

Corner Radius of Tool given Machining Time Solution

Corner Radius of Tool given Machining Time Formula Elements

Other formulas in Accuracy and Surface Finish category

How to Evaluate Corner Radius of Tool given Machining Time?

FAQs on Corner Radius of Tool given Machining Time

Variable Name