FormulaDen.com

Physics Chemistry Math Chemical Engineering Civil Electrical Electronics Electronics and Instrumentation Materials Science Mechanical Production Engineering Financial Health

Conveyance of Channel at End Sections at 1 Formula

GoConveyance of Channel for Non-Uniform Flow for End Sections Formula

Fx Copy

LaTeX Copy

Conveyance of Channel at End Sections at (1) represents the carrying capacity of a stream cross-section based upon its geometry and roughness characteristics. Check FAQs

K 1 = (\frac{1}{n}) \cdot A 1 \cdot {R 1}^{\frac{2}{3}}

K₁ - Conveyance of Channel at End Sections at (1)?n - Manning’s Roughness Coefficient?A₁ - Area of Channel Section 1?R₁ - Hydraulics Radius of Channel Section 1?

Conveyance of Channel at End Sections at 1 Example

With values

With units

Only example

Here is how the Conveyance of Channel at End Sections at 1 equation looks like with Values.

Here is how the Conveyance of Channel at End Sections at 1 equation looks like with Units.

Here is how the Conveyance of Channel at End Sections at 1 equation looks like.

1823.1843 = (\frac{1}{0.412}) \cdot 494 \cdot {1.875}^{\frac{2}{3}}

1823.1843 = (\frac{1}{0.412}) \cdot 494m² \cdot {1.875m}^{\frac{2}{3}}

1823.1843 = (\frac{1}{0.412}) \cdot 494 \cdot {1.875}^{\frac{2}{3}}

Tip: Use pencil ( Pencil

) icon above to edit Input Values and Units.

Calculate

Recalculate

Solution

Copy

Reset

You are here -

Home » Category

Engineering » Category

Civil » Category

Engineering Hydrology » fx Conveyance of Channel at End Sections at 1

Conveyance of Channel at End Sections at 1 Solution

Follow our step by step solution on how to calculate Conveyance of Channel at End Sections at 1?

FIRST Step Consider the formula

K 1 = (\frac{1}{n}) \cdot A 1 \cdot {R 1}^{\frac{2}{3}}

Next Step Substitute values of Variables

∴

K 1 = (\frac{1}{0.412}) \cdot 494m² \cdot {1.875m}^{\frac{2}{3}}

Next Step Prepare to Evaluate

∴

K 1 = (\frac{1}{0.412}) \cdot 494 \cdot {1.875}^{\frac{2}{3}}

Next Step Evaluate

∴

K 1 = 1823.18433605174

LAST Step Rounding Answer

∴

K 1 = 1823.1843

Conveyance of Channel at End Sections at 1 Formula Elements

Variables

Conveyance of Channel at End Sections at (1)

Conveyance of Channel at End Sections at (1) represents the carrying capacity of a stream cross-section based upon its geometry and roughness characteristics.

Symbol: K₁

Measurement: NAUnit: Unitless

Note: Value can be positive or negative.

Formulas to find Conveyance of Channel at End Sections at (1)

Manning’s Roughness Coefficient

Manning’s Roughness Coefficient represents the roughness or friction applied to the flow by the channel.

Symbol: n

Measurement: NAUnit: Unitless

Note: Value can be positive or negative.

Formulas to find Manning’s Roughness Coefficient

Area of Channel Section 1

Area of Channel Section 1 is the enclosed surface area, the product of length and breadth.

Symbol: A₁

Measurement: AreaUnit: m²

Note: Value should be greater than 0.

Formulas to find Area of Channel Section 1

Hydraulics Radius of Channel Section 1

Hydraulics Radius of Channel Section 1 is the ratio of the cross-sectional area of a channel or pipe in which a fluid is flowing to the wet perimeter of the conduit.

Symbol: R₁

Measurement: LengthUnit: m

Note: Value should be greater than 0.

Formulas to find Hydraulics Radius of Channel Section 1

Other Formulas to find Conveyance of Channel at End Sections at (1)

Go Conveyance of Channel for Non-Uniform Flow for End Sections

K 1 = \frac{{K avg}^{2}}{K 2}

Other formulas in Non Uniform Flow category

Go Length of Reach given Average Energy Slope for Non-Uniform Flow

L = \frac{h f}{S favg}

Go Frictional Loss given Average Energy Slope

h f = S favg \cdot L

Go Average Energy Slope given Frictional Loss

S favg = \frac{h f}{L}

Go Average Energy Slope given Average Conveyance for Non-Uniform Flow

S favg = \frac{Q^{2}}{K^{2}}

How to Evaluate Conveyance of Channel at End Sections at 1?

Conveyance of Channel at End Sections at 1 evaluator uses Conveyance of Channel at End Sections at (1) = (1/Manning’s Roughness Coefficient)*Area of Channel Section 1*Hydraulics Radius of Channel Section 1^(2/3) to evaluate the Conveyance of Channel at End Sections at (1), The Conveyance of Channel at End Sections at 1 formula is defined as the carrying capacity of a stream cross-section based upon its geometry and roughness characteristics alone and is independent of the streambed slope. Conveyance of Channel at End Sections at (1) is denoted by K₁ symbol.

How to evaluate Conveyance of Channel at End Sections at 1 using this online evaluator? To use this online evaluator for Conveyance of Channel at End Sections at 1, enter Manning’s Roughness Coefficient (n), Area of Channel Section 1 (A₁) & Hydraulics Radius of Channel Section 1 (R₁) and hit the calculate button.

FAQs on Conveyance of Channel at End Sections at 1

What is the formula to find Conveyance of Channel at End Sections at 1?

The formula of Conveyance of Channel at End Sections at 1 is expressed as Conveyance of Channel at End Sections at (1) = (1/Manning’s Roughness Coefficient)*Area of Channel Section 1*Hydraulics Radius of Channel Section 1^(2/3). Here is an example- 110.7197 = (1/0.412)*494*1.875^(2/3).

How to calculate Conveyance of Channel at End Sections at 1?

With Manning’s Roughness Coefficient (n), Area of Channel Section 1 (A₁) & Hydraulics Radius of Channel Section 1 (R₁) we can find Conveyance of Channel at End Sections at 1 using the formula - Conveyance of Channel at End Sections at (1) = (1/Manning’s Roughness Coefficient)*Area of Channel Section 1*Hydraulics Radius of Channel Section 1^(2/3).

What are the other ways to Calculate Conveyance of Channel at End Sections at (1)?

Here are the different ways to Calculate Conveyance of Channel at End Sections at (1)-

Conveyance of Channel at End Sections at (1)=Average Conveyance of Channel^2/Conveyance of Channel at End Sections at (2)

Let Others Know

✖

Facebook

Twitter

Copied!

: Value
: Unit