FormulaDen.com

Physics Chemistry Math Chemical Engineering Civil Electrical Electronics Electronics and Instrumentation Materials Science Mechanical Production Engineering Financial Health

Compaction Production by Compaction Equipment when Efficiency Factor is Average Formula

Fx Copy

LaTeX Copy

Compaction Production (Effi. Factor is Average) gives the effectiveness of soil compaction operations. With "average" efficiency factor indicate that the performance is based on industry standards. Check FAQs

y a = \frac{16 \cdot W \cdot S \cdot L \cdot PR \cdot 0.80}{P}

y_a - Compaction Production (Effi. Factor is Average)?W - Width of Roller?S - Roller Speed?L - Lift Thickness?PR - Pay Ratio?P - Number of Passes?

Compaction Production by Compaction Equipment when Efficiency Factor is Average Example

With values

With units

Only example

Here is how the Compaction Production by Compaction Equipment when Efficiency Factor is Average equation looks like with Values.

Here is how the Compaction Production by Compaction Equipment when Efficiency Factor is Average equation looks like with Units.

Here is how the Compaction Production by Compaction Equipment when Efficiency Factor is Average equation looks like.

476.1592 = \frac{16 \cdot 2.89 \cdot 3 \cdot 7.175 \cdot 2.99 \cdot 0.80}{5}

476.1592m³/hr = \frac{16 \cdot 2.89m \cdot 3km/h \cdot 7.175mm \cdot 2.99m³ \cdot 0.80}{5}

476.1592 = \frac{16 \cdot 2.89 \cdot 3 \cdot 7.175 \cdot 2.99 \cdot 0.80}{5}

Tip: Use pencil ( Pencil

) icon above to edit Input Values and Units.

Calculate

Recalculate

Solution

Copy

Reset

You are here -

Home » Category

Engineering » Category

Civil » Category

Geotechnical Engineering » fx Compaction Production by Compaction Equipment when Efficiency Factor is Average

Compaction Production by Compaction Equipment when Efficiency Factor is Average Solution

Follow our step by step solution on how to calculate Compaction Production by Compaction Equipment when Efficiency Factor is Average?

FIRST Step Consider the formula

y a = \frac{16 \cdot W \cdot S \cdot L \cdot PR \cdot 0.80}{P}

Next Step Substitute values of Variables

∴

y a = \frac{16 \cdot 2.89m \cdot 3km/h \cdot 7.175mm \cdot 2.99m³ \cdot 0.80}{5}

Next Step Convert Units

∴

y a = \frac{16 \cdot 2.89m \cdot 0.8333m/s \cdot 0.0072m \cdot 2.99m³ \cdot 0.80}{5}

Next Step Prepare to Evaluate

∴

y a = \frac{16 \cdot 2.89 \cdot 0.8333 \cdot 0.0072 \cdot 2.99 \cdot 0.80}{5}

Next Step Evaluate

∴

y a = 0.132266437333333m³/s

Next Step Convert to Output's Unit

∴

y a = 476.1591744m³/hr

LAST Step Rounding Answer

∴

y a = 476.1592m³/hr

Compaction Production by Compaction Equipment when Efficiency Factor is Average Formula Elements

Variables

Compaction Production (Effi. Factor is Average)

Compaction Production (Effi. Factor is Average) gives the effectiveness of soil compaction operations. With "average" efficiency factor indicate that the performance is based on industry standards.

Symbol: y_a

Measurement: Volumetric Flow RateUnit: m³/hr

Note: Value should be greater than 0.

Formulas to find Compaction Production (Effi. Factor is Average)

Width of Roller

Width of Roller is the physical width of the roller used in compaction processes, such as those employed in soil and pavement construction.

Symbol: W

Measurement: LengthUnit: m

Note: Value should be greater than 0.

Formulas to find Width of Roller

Roller Speed

Roller Speed is the velocity at which a compaction roller moves over soil or other materials during the compaction process.

Symbol: S

Measurement: SpeedUnit: km/h

Note: Value should be greater than 0.

Formulas to find Roller Speed

Lift Thickness

Lift Thickness is the depth of a compacted layer of fill material placed during construction. This term is important in the compaction process, where fill material is often placed in layers.

Symbol: L

Measurement: LengthUnit: mm

Note: Value should be greater than 0.

Formulas to find Lift Thickness

Pay Ratio

Pay Ratio is the ratio between the effective stress and the total stress in soil mechanics.

Symbol: PR

Measurement: VolumeUnit: m³

Note: Value should be greater than 0.

Formulas to find Pay Ratio

Number of Passes

Number of Passes is the number of times a compactor (such as a vibratory roller or a plate compactor) passes over a specific area of soil or aggregate during compaction.

Symbol: P

Measurement: NAUnit: Unitless

Note: Value should be greater than 0.

Formulas to find Number of Passes

Other formulas in Compaction Equipment category

Go Compaction Production by Compaction Equipment

y = \frac{16 \cdot W \cdot S \cdot L \cdot E \cdot PR}{P}

Go Width of Roller given Compaction Production by Compaction Equipment

W = \frac{y \cdot P}{16 \cdot S \cdot L \cdot PR \cdot E}

Go Speed of Roller given Compaction Production by Compaction Equipment

S = \frac{y \cdot P}{16 \cdot W \cdot L \cdot PR \cdot E}

Go Thickness of Lift given Compaction Production by Compaction Equipment

L = \frac{y \cdot P}{16 \cdot W \cdot S \cdot E \cdot PR}

How to Evaluate Compaction Production by Compaction Equipment when Efficiency Factor is Average?

Compaction Production by Compaction Equipment when Efficiency Factor is Average evaluator uses Compaction Production (Effi. Factor is Average) = (16*Width of Roller*Roller Speed*Lift Thickness*Pay Ratio*0.80)/Number of Passes to evaluate the Compaction Production (Effi. Factor is Average), The Compaction Production by Compaction Equipment when Efficiency Factor is Average formula is defined as the the amount of soil or material that compaction equipment can compact within a specific time frame under average operating conditions. This includes factors such as the machine's capability, soil type, moisture content, and operator efficiency. Compaction Production (Effi. Factor is Average) is denoted by y_a symbol.

How to evaluate Compaction Production by Compaction Equipment when Efficiency Factor is Average using this online evaluator? To use this online evaluator for Compaction Production by Compaction Equipment when Efficiency Factor is Average, enter Width of Roller (W), Roller Speed (S), Lift Thickness (L), Pay Ratio (PR) & Number of Passes (P) and hit the calculate button.

FAQs on Compaction Production by Compaction Equipment when Efficiency Factor is Average

What is the formula to find Compaction Production by Compaction Equipment when Efficiency Factor is Average?

The formula of Compaction Production by Compaction Equipment when Efficiency Factor is Average is expressed as Compaction Production (Effi. Factor is Average) = (16*Width of Roller*Roller Speed*Lift Thickness*Pay Ratio*0.80)/Number of Passes. Here is an example- 1.7E+6 = (16*2.89*0.833333333333333*0.007175*2.99*0.80)/5.

How to calculate Compaction Production by Compaction Equipment when Efficiency Factor is Average?

With Width of Roller (W), Roller Speed (S), Lift Thickness (L), Pay Ratio (PR) & Number of Passes (P) we can find Compaction Production by Compaction Equipment when Efficiency Factor is Average using the formula - Compaction Production (Effi. Factor is Average) = (16*Width of Roller*Roller Speed*Lift Thickness*Pay Ratio*0.80)/Number of Passes.

Can the Compaction Production by Compaction Equipment when Efficiency Factor is Average be negative?

No, the Compaction Production by Compaction Equipment when Efficiency Factor is Average, measured in Volumetric Flow Rate cannot be negative.

Which unit is used to measure Compaction Production by Compaction Equipment when Efficiency Factor is Average?

Compaction Production by Compaction Equipment when Efficiency Factor is Average is usually measured using the Cubic Meter per Hour[m³/hr] for Volumetric Flow Rate. Cubic Meter per Second[m³/hr], Cubic Meter per Day[m³/hr], Cubic Meter per Minute[m³/hr] are the few other units in which Compaction Production by Compaction Equipment when Efficiency Factor is Average can be measured.

Let Others Know

✖

Facebook

Twitter

Copied!

Compaction Production by Compaction Equipment when Efficiency Factor is Average Formula

Compaction Production by Compaction Equipment when Efficiency Factor is Average Example

Compaction Production by Compaction Equipment when Efficiency Factor is Average Solution

Compaction Production by Compaction Equipment when Efficiency Factor is Average Formula Elements

Other formulas in Compaction Equipment category

How to Evaluate Compaction Production by Compaction Equipment when Efficiency Factor is Average?

FAQs on Compaction Production by Compaction Equipment when Efficiency Factor is Average

Variable Name