FormulaDen.com

Physics Chemistry Math Chemical Engineering Civil Electrical Electronics Electronics and Instrumentation Materials Science Mechanical Production Engineering Financial Health

Coefficient of Aquifer Permeability considering Discharge per Unit Width of Aquifer Formula

GoCoefficient of Aquifer Permeability given Maximum Height of Water Table Formula

GoCoefficient of Aquifer Permeability given Water Table Profile Formula

Fx Copy

LaTeX Copy

The Coefficient of Permeability of soil describes how easily a liquid will move through the soil. Check FAQs

K = \frac{Q \cdot 2 \cdot L stream}{({h o}^{2}) - ({h 1}^{2})}

K - Coefficient of Permeability?Q - Discharge?L_stream - Length between Upstream and Downstream?h_o - Piezometric Head at Upstream End?h₁ - Piezometric Head at Downstream End?

Coefficient of Aquifer Permeability considering Discharge per Unit Width of Aquifer Example

With values

With units

Only example

Here is how the Coefficient of Aquifer Permeability considering Discharge per Unit Width of Aquifer equation looks like with Values.

Here is how the Coefficient of Aquifer Permeability considering Discharge per Unit Width of Aquifer equation looks like with Units.

Here is how the Coefficient of Aquifer Permeability considering Discharge per Unit Width of Aquifer equation looks like.

8.9361 = \frac{1.3 \cdot 2 \cdot 4.09}{(12^{2}) - (5^{2})}

8.9361cm/s = \frac{1.3m³/s \cdot 2 \cdot 4.09m}{({12m}^{2}) - ({5m}^{2})}

8.9361 = \frac{1.3 \cdot 2 \cdot 4.09}{(12^{2}) - (5^{2})}

Tip: Use pencil ( Pencil

) icon above to edit Input Values and Units.

Calculate

Recalculate

Solution

Copy

Reset

You are here -

Home » Category

Engineering » Category

Civil » Category

Engineering Hydrology » fx Coefficient of Aquifer Permeability considering Discharge per Unit Width of Aquifer

Coefficient of Aquifer Permeability considering Discharge per Unit Width of Aquifer Solution

Follow our step by step solution on how to calculate Coefficient of Aquifer Permeability considering Discharge per Unit Width of Aquifer?

FIRST Step Consider the formula

K = \frac{Q \cdot 2 \cdot L stream}{({h o}^{2}) - ({h 1}^{2})}

Next Step Substitute values of Variables

∴

K = \frac{1.3m³/s \cdot 2 \cdot 4.09m}{({12m}^{2}) - ({5m}^{2})}

Next Step Prepare to Evaluate

∴

K = \frac{1.3 \cdot 2 \cdot 4.09}{(12^{2}) - (5^{2})}

Next Step Evaluate

∴

K = 0.0893613445378151m/s

Next Step Convert to Output's Unit

∴

K = 8.93613445378151cm/s

LAST Step Rounding Answer

∴

K = 8.9361cm/s

Coefficient of Aquifer Permeability considering Discharge per Unit Width of Aquifer Formula Elements

Variables

Coefficient of Permeability

The Coefficient of Permeability of soil describes how easily a liquid will move through the soil.

Symbol: K

Measurement: SpeedUnit: cm/s

Note: Value should be greater than 0.

Formulas to find Coefficient of Permeability

Discharge

The Discharge refers to the volumetric flow rate of water that is transported through a given cross-sectional area. It includes any suspended solids, dissolved chemicals, or biologic material.

Symbol: Q

Measurement: Volumetric Flow RateUnit: m³/s

Note: Value should be greater than 0.

Formulas to find Discharge

Length between Upstream and Downstream

The Length between Upstream and Downstream refers to the horizontal base with a difference in surface elevations.

Symbol: L_stream

Measurement: LengthUnit: m

Note: Value should be greater than 0.

Formulas to find Length between Upstream and Downstream

Piezometric Head at Upstream End

The Piezometric Head at Upstream End refers to the specific measurement of liquid pressure above a vertical datum.

Symbol: h_o

Measurement: LengthUnit: m

Note: Value can be positive or negative.

Formulas to find Piezometric Head at Upstream End

Piezometric Head at Downstream End

The Piezometric Head at Downstream End refers to the specific measurement of liquid pressure above a vertical datum.

Symbol: h₁

Measurement: LengthUnit: m

Note: Value can be positive or negative.

Formulas to find Piezometric Head at Downstream End

Other Formulas to find Coefficient of Permeability

Go Coefficient of Aquifer Permeability given Maximum Height of Water Table

K = \frac{R \cdot L^{2}}{{(2 \cdot h m)}^{2}}

Go Coefficient of Aquifer Permeability given Water Table Profile

K = ((\frac{R}{h^{2}}) \cdot (L - x) \cdot x)

Other formulas in One Dimensional Dupit's Flow with Recharge category

Go Equation of Head for Unconfined Aquifer on Horizontal Impervious Base

h = \sqrt{(\frac{- R \cdot x^{2}}{K}) - ((\frac{{h o}^{2} - {h 1}^{2} - (\frac{R \cdot {L stream}^{2}}{K})}{L stream}) \cdot x) + {h o}^{2}}

Go Equation for Water Divide

a = (\frac{L stream}{2}) - (\frac{K}{R}) \cdot (\frac{{h o}^{2} - {h 1}^{2}}{2} \cdot L stream)

Go Discharge per Unit Width of Aquifer at any Location x

q x = R \cdot (x - (\frac{L stream}{2})) + (\frac{K}{2} \cdot L stream) \cdot ({h o}^{2} - {h 1}^{2})

Go Discharge at Downstream Water Body of Catchment

q 1 = (\frac{R \cdot L stream}{2}) + ((\frac{K}{2 \cdot L stream}) \cdot ({h o}^{2} - {h 1}^{2}))

How to Evaluate Coefficient of Aquifer Permeability considering Discharge per Unit Width of Aquifer?

Coefficient of Aquifer Permeability considering Discharge per Unit Width of Aquifer evaluator uses Coefficient of Permeability = (Discharge*2*Length between Upstream and Downstream)/((Piezometric Head at Upstream End^2)-(Piezometric Head at Downstream End^2)) to evaluate the Coefficient of Permeability, The Coefficient of Aquifer Permeability considering Discharge per Unit Width of Aquifer formula is defined as the measure of the capacity of the soil with which the water can easily flow through it. Coefficient of Permeability is denoted by K symbol.

How to evaluate Coefficient of Aquifer Permeability considering Discharge per Unit Width of Aquifer using this online evaluator? To use this online evaluator for Coefficient of Aquifer Permeability considering Discharge per Unit Width of Aquifer, enter Discharge (Q), Length between Upstream and Downstream (L_stream), Piezometric Head at Upstream End (h_o) & Piezometric Head at Downstream End (h₁) and hit the calculate button.

FAQs on Coefficient of Aquifer Permeability considering Discharge per Unit Width of Aquifer

What is the formula to find Coefficient of Aquifer Permeability considering Discharge per Unit Width of Aquifer?

The formula of Coefficient of Aquifer Permeability considering Discharge per Unit Width of Aquifer is expressed as Coefficient of Permeability = (Discharge*2*Length between Upstream and Downstream)/((Piezometric Head at Upstream End^2)-(Piezometric Head at Downstream End^2)). Here is an example- 15122.69 = (1.3*2*4.09)/((12^2)-(5^2)).

How to calculate Coefficient of Aquifer Permeability considering Discharge per Unit Width of Aquifer?

With Discharge (Q), Length between Upstream and Downstream (L_stream), Piezometric Head at Upstream End (h_o) & Piezometric Head at Downstream End (h₁) we can find Coefficient of Aquifer Permeability considering Discharge per Unit Width of Aquifer using the formula - Coefficient of Permeability = (Discharge*2*Length between Upstream and Downstream)/((Piezometric Head at Upstream End^2)-(Piezometric Head at Downstream End^2)).

What are the other ways to Calculate Coefficient of Permeability?

Here are the different ways to Calculate Coefficient of Permeability-

Coefficient of Permeability=(Natural Recharge*Length between Tile Drain^2)/(2*Maximum Height of Water Table)^2
Coefficient of Permeability=((Natural Recharge/Water Table Profile^2)*(Length between Tile Drain-Flow in 'x' Direction)*Flow in 'x' Direction)

Can the Coefficient of Aquifer Permeability considering Discharge per Unit Width of Aquifer be negative?

No, the Coefficient of Aquifer Permeability considering Discharge per Unit Width of Aquifer, measured in Speed cannot be negative.

Which unit is used to measure Coefficient of Aquifer Permeability considering Discharge per Unit Width of Aquifer?

Coefficient of Aquifer Permeability considering Discharge per Unit Width of Aquifer is usually measured using the Centimeter per Second[cm/s] for Speed. Meter per Second[cm/s], Meter per Minute[cm/s], Meter per Hour[cm/s] are the few other units in which Coefficient of Aquifer Permeability considering Discharge per Unit Width of Aquifer can be measured.

Let Others Know

✖

Facebook

Twitter

Copied!

Coefficient of Aquifer Permeability considering Discharge per Unit Width of Aquifer Formula

​GoCoefficient of Aquifer Permeability given Maximum Height of Water Table Formula

​GoCoefficient of Aquifer Permeability given Water Table Profile Formula

Coefficient of Aquifer Permeability considering Discharge per Unit Width of Aquifer Example

Coefficient of Aquifer Permeability considering Discharge per Unit Width of Aquifer Solution

Coefficient of Aquifer Permeability considering Discharge per Unit Width of Aquifer Formula Elements

Other Formulas to find Coefficient of Permeability

Other formulas in One Dimensional Dupit's Flow with Recharge category

How to Evaluate Coefficient of Aquifer Permeability considering Discharge per Unit Width of Aquifer?

FAQs on Coefficient of Aquifer Permeability considering Discharge per Unit Width of Aquifer

Variable Name

GoCoefficient of Aquifer Permeability given Maximum Height of Water Table Formula

GoCoefficient of Aquifer Permeability given Water Table Profile Formula