FormulaDen.com

Physics Chemistry Math Chemical Engineering Civil Electrical Electronics Electronics and Instrumentation Materials Science Mechanical Production Engineering Financial Health

Chamber Length using Air Supply required Formula

GoLength of Grit Chamber Formula

Fx Copy

LaTeX Copy

The Length of Grit Chamber refers to the horizontal distance from its inlet to outlet, designed to allow grit particles to settle, typically around 10 to 20 meters. Check FAQs

L = (\frac{A}{A s})

L - Length of Grit Chamber?A - Chosen Air Supply?A_s - Air Supply Required?

Chamber Length using Air Supply required Example

With values

With units

Only example

Here is how the Chamber Length using Air Supply required equation looks like with Values.

Here is how the Chamber Length using Air Supply required equation looks like with Units.

Here is how the Chamber Length using Air Supply required equation looks like.

6.9737 = (\frac{0.053}{0.0076})

6.9737m = (\frac{0.053m²/s}{0.0076m³/s})

6.9737 = (\frac{0.053}{0.0076})

Tip: Use pencil ( Pencil

) icon above to edit Input Values and Units.

Calculate

Recalculate

Solution

Copy

Reset

You are here -

Home » Category

Engineering » Category

Civil » Category

Environmental Engineering » fx Chamber Length using Air Supply required

Chamber Length using Air Supply required Solution

Follow our step by step solution on how to calculate Chamber Length using Air Supply required?

FIRST Step Consider the formula

L = (\frac{A}{A s})

Next Step Substitute values of Variables

∴

L = (\frac{0.053m²/s}{0.0076m³/s})

Next Step Prepare to Evaluate

∴

L = (\frac{0.053}{0.0076})

Next Step Evaluate

∴

L = 6.97368421052632m

LAST Step Rounding Answer

∴

L = 6.9737m

Chamber Length using Air Supply required Formula Elements

Variables

Length of Grit Chamber

The Length of Grit Chamber refers to the horizontal distance from its inlet to outlet, designed to allow grit particles to settle, typically around 10 to 20 meters.

Symbol: L

Measurement: LengthUnit: m

Note: Value should be greater than 0.

Formulas to find Length of Grit Chamber

Chosen Air Supply

The Chosen Air Supply refers to the selected rate of airflow provided to a treatment process to ensure adequate aeration or mixing, typically measured in (m³/h) or (L/s).

Symbol: A

Measurement: Kinematic ViscosityUnit: m²/s

Note: Value should be greater than 0.

Formulas to find Chosen Air Supply

Air Supply Required

The Air Supply Required refers to the amount of air needed to maintain aerobic conditions or mixing in a treatment process, typically measured in (m³/h) or (L/s).

Symbol: A_s

Measurement: Volumetric Flow RateUnit: m³/s

Note: Value should be greater than 0.

Formulas to find Air Supply Required

Other Formulas to find Length of Grit Chamber

Go Length of Grit Chamber

L = (\frac{V T}{W \cdot D})

Other formulas in Design of an Aerated Grit Chamber category

Go Volume of Each Grit Chamber

V T = (Q p \cdot T d)

Go Peak Flow Rate given Volume of Each Grit Chamber

Q p = \frac{V T}{T d}

Go Detention Time given Volume of Each Grit Chamber

T d = \frac{V T}{Q p}

Go Width of Grit Chamber

W = (R \cdot D)

How to Evaluate Chamber Length using Air Supply required?

Chamber Length using Air Supply required evaluator uses Length of Grit Chamber = (Chosen Air Supply/Air Supply Required) to evaluate the Length of Grit Chamber, The Chamber Length using Air Supply required formula is defined as calculating the horizontal distance from its inlet to outlet, designed to allow grit particles to settle, typically around 10 to 20 meters, calculated using the value of air supply. Length of Grit Chamber is denoted by L symbol.

How to evaluate Chamber Length using Air Supply required using this online evaluator? To use this online evaluator for Chamber Length using Air Supply required, enter Chosen Air Supply (A) & Air Supply Required (A_s) and hit the calculate button.

FAQs on Chamber Length using Air Supply required

What is the formula to find Chamber Length using Air Supply required?

The formula of Chamber Length using Air Supply required is expressed as Length of Grit Chamber = (Chosen Air Supply/Air Supply Required). Here is an example- 1315.789 = (0.053/0.0076).

How to calculate Chamber Length using Air Supply required?

With Chosen Air Supply (A) & Air Supply Required (A_s) we can find Chamber Length using Air Supply required using the formula - Length of Grit Chamber = (Chosen Air Supply/Air Supply Required).

What are the other ways to Calculate Length of Grit Chamber?

Here are the different ways to Calculate Length of Grit Chamber-

Length of Grit Chamber=(Volume of Grit Chamber/(Width of Grit Chamber*Depth of Grit Chamber))

Can the Chamber Length using Air Supply required be negative?

No, the Chamber Length using Air Supply required, measured in Length cannot be negative.

Which unit is used to measure Chamber Length using Air Supply required?

Chamber Length using Air Supply required is usually measured using the Meter[m] for Length. Millimeter[m], Kilometer[m], Decimeter[m] are the few other units in which Chamber Length using Air Supply required can be measured.

Let Others Know

✖

Facebook

Twitter

Copied!

: Value
: Unit

Chamber Length using Air Supply required Formula

​GoLength of Grit Chamber Formula

Chamber Length using Air Supply required Example

Chamber Length using Air Supply required Solution

Chamber Length using Air Supply required Formula Elements

Other Formulas to find Length of Grit Chamber

Other formulas in Design of an Aerated Grit Chamber category

How to Evaluate Chamber Length using Air Supply required?

FAQs on Chamber Length using Air Supply required

Variable Name

GoLength of Grit Chamber Formula