FormulaDen.com

Physics Chemistry Math Chemical Engineering Civil Electrical Electronics Electronics and Instrumentation Materials Science Mechanical Production Engineering Financial Health

Bottom Gating Formula

Fx Copy

LaTeX Copy

Bottom gating pouring time, it is the time for liquid metal filled in the mold from bottom to top, thus avoiding the splashing and oxidation associated with vertical gating. Check FAQs

T bg = \frac{A ratio}{\sqrt{2 \cdot a c}} \cdot 2 \cdot (\sqrt{l} - \sqrt{l - h c})

T_bg - Bottom Gating Pouring Time?A_ratio - Ratio of Area?a_c - Acceleration?l - Length of Cylinder?h_c - Height of Capillary Rise/Fall?

Bottom Gating Example

With values

With units

Only example

Here is how the Bottom Gating equation looks like with Values.

Here is how the Bottom Gating equation looks like with Units.

Here is how the Bottom Gating equation looks like.

0.0043 = \frac{5.24}{\sqrt{2 \cdot 12.56}} \cdot 2 \cdot (\sqrt{6} - \sqrt{6 - 0.01})

0.0043s = \frac{5.24}{\sqrt{2 \cdot 12.56m/s²}} \cdot 2 \cdot (\sqrt{6m} - \sqrt{6m - 0.01m})

0.0043 = \frac{5.24}{\sqrt{2 \cdot 12.56}} \cdot 2 \cdot (\sqrt{6} - \sqrt{6 - 0.01})

Tip: Use pencil ( Pencil

) icon above to edit Input Values and Units.

Calculate

Recalculate

Solution

Copy

Reset

You are here -

Home » Category

Engineering » Category

Mechanical » Category

Manufacturing » fx Bottom Gating

Bottom Gating Solution

Follow our step by step solution on how to calculate Bottom Gating?

FIRST Step Consider the formula

T bg = \frac{A ratio}{\sqrt{2 \cdot a c}} \cdot 2 \cdot (\sqrt{l} - \sqrt{l - h c})

Next Step Substitute values of Variables

∴

T bg = \frac{5.24}{\sqrt{2 \cdot 12.56m/s²}} \cdot 2 \cdot (\sqrt{6m} - \sqrt{6m - 0.01m})

Next Step Prepare to Evaluate

∴

T bg = \frac{5.24}{\sqrt{2 \cdot 12.56}} \cdot 2 \cdot (\sqrt{6} - \sqrt{6 - 0.01})

Next Step Evaluate

∴

T bg = 0.00426999054621799s

LAST Step Rounding Answer

∴

T bg = 0.0043s

Bottom Gating Formula Elements

Variables

Functions

Bottom Gating Pouring Time

Bottom gating pouring time, it is the time for liquid metal filled in the mold from bottom to top, thus avoiding the splashing and oxidation associated with vertical gating.

Symbol: T_bg

Measurement: TimeUnit: s

Note: Value should be greater than 0.

Formulas to find Bottom Gating Pouring Time

Ratio of Area

Ratio of area is the ratio of initial to final area.

Symbol: A_ratio

Measurement: NAUnit: Unitless

Note: Value can be positive or negative.

Formulas to find Ratio of Area

Acceleration

Acceleration is the rate of change in velocity to the change in time.

Symbol: a_c

Measurement: AccelerationUnit: m/s²

Note: Value can be positive or negative.

Formulas to find Acceleration

Length of Cylinder

Length of Cylinder is the vertical height of the Cylinder.

Symbol: l

Measurement: LengthUnit: m

Note: Value should be greater than 0.

Formulas to find Length of Cylinder

Height of Capillary Rise/Fall

The Height of Capillary Rise/Fall is the level to which the water rises or falls in a capillary tube.

Symbol: h_c

Measurement: LengthUnit: m

Note: Value can be positive or negative.

Formulas to find Height of Capillary Rise/Fall

sqrt

A square root function is a function that takes a non-negative number as an input and returns the square root of the given input number.

Syntax: sqrt(Number)

Other formulas in Casting category

Go Caine's Formula

X = \frac{SA Casting \cdot VR}{SA Riser \cdot VC}

Go Shape Factor

SF = \frac{LC + WC}{TC}

Go Solidification Time

T = ST \cdot {(\frac{VC}{SA Casting})}^{2}

Go Aspiration Effect

AE = \frac{A}{A cs}

How to Evaluate Bottom Gating?

Bottom Gating evaluator uses Bottom Gating Pouring Time = Ratio of Area/sqrt(2*Acceleration)*2*(sqrt(Length of Cylinder)-sqrt(Length of Cylinder-Height of Capillary Rise/Fall)) to evaluate the Bottom Gating Pouring Time, Bottom Gating, the liquid metal is filled in the mold from bottom to top, thus avoiding the splashing and oxidation associated with vertical gating. Bottom Gating Pouring Time is denoted by T_bg symbol.

How to evaluate Bottom Gating using this online evaluator? To use this online evaluator for Bottom Gating, enter Ratio of Area (A_ratio), Acceleration (a_c), Length of Cylinder (l) & Height of Capillary Rise/Fall (h_c) and hit the calculate button.

FAQs on Bottom Gating

What is the formula to find Bottom Gating?

The formula of Bottom Gating is expressed as Bottom Gating Pouring Time = Ratio of Area/sqrt(2*Acceleration)*2*(sqrt(Length of Cylinder)-sqrt(Length of Cylinder-Height of Capillary Rise/Fall)). Here is an example- 0.00427 = 5.24/sqrt(2*12.56)*2*(sqrt(6)-sqrt(6-0.01)).

How to calculate Bottom Gating?

With Ratio of Area (A_ratio), Acceleration (a_c), Length of Cylinder (l) & Height of Capillary Rise/Fall (h_c) we can find Bottom Gating using the formula - Bottom Gating Pouring Time = Ratio of Area/sqrt(2*Acceleration)*2*(sqrt(Length of Cylinder)-sqrt(Length of Cylinder-Height of Capillary Rise/Fall)). This formula also uses Square Root (sqrt) function(s).

Can the Bottom Gating be negative?

No, the Bottom Gating, measured in Time cannot be negative.

Which unit is used to measure Bottom Gating?

Bottom Gating is usually measured using the Second[s] for Time. Millisecond[s], Microsecond[s], Nanosecond[s] are the few other units in which Bottom Gating can be measured.

Let Others Know

✖

Facebook

Twitter

Copied!

: Value
: Unit

Bottom Gating Formula

Bottom Gating Example

Bottom Gating Solution

Bottom Gating Formula Elements

Other formulas in Casting category

How to Evaluate Bottom Gating?

FAQs on Bottom Gating

Variable Name