FormulaDen.com

Physics Chemistry Math Chemical Engineering Civil Electrical Electronics Electronics and Instrumentation Materials Science Mechanical Production Engineering Financial Health

Bending Stress using Eccentric Load and Eccentricity Formula

GoBending Stress given Moment due to Load Formula

Fx Copy

LaTeX Copy

Bending Stress in Column is the normal stress that is induced at a point in a body subjected to loads that cause it to bend. Check FAQs

σ b = \frac{6 \cdot P \cdot e load}{h \cdot (b^{2})}

σ_b - Bending Stress in Column?P - Eccentric load on column?e_load - Eccentricity of Loading?h - Depth of Column?b - Width of column?

Bending Stress using Eccentric Load and Eccentricity Example

With values

With units

Only example

Here is how the Bending Stress using Eccentric Load and Eccentricity equation looks like with Values.

Here is how the Bending Stress using Eccentric Load and Eccentricity equation looks like with Units.

Here is how the Bending Stress using Eccentric Load and Eccentricity equation looks like.

0.001 = \frac{6 \cdot 7 \cdot 25}{3000 \cdot (600^{2})}

0.001MPa = \frac{6 \cdot 7kN \cdot 25mm}{3000mm \cdot ({600mm}^{2})}

0.001 = \frac{6 \cdot 7 \cdot 25}{3000 \cdot (600^{2})}

Tip: Use pencil ( Pencil

) icon above to edit Input Values and Units.

Calculate

Recalculate

Solution

Copy

Reset

You are here -

Home » Category

Physics » Category

Mechanical » Category

Strength of Materials » fx Bending Stress using Eccentric Load and Eccentricity

Bending Stress using Eccentric Load and Eccentricity Solution

Follow our step by step solution on how to calculate Bending Stress using Eccentric Load and Eccentricity?

FIRST Step Consider the formula

σ b = \frac{6 \cdot P \cdot e load}{h \cdot (b^{2})}

Next Step Substitute values of Variables

∴

σ b = \frac{6 \cdot 7kN \cdot 25mm}{3000mm \cdot ({600mm}^{2})}

Next Step Convert Units

∴

σ b = \frac{6 \cdot 7000N \cdot 0.025m}{3m \cdot ({0.6m}^{2})}

Next Step Prepare to Evaluate

∴

σ b = \frac{6 \cdot 7000 \cdot 0.025}{3 \cdot ({0.6}^{2})}

Next Step Evaluate

∴

σ b = 972.222222222222Pa

Next Step Convert to Output's Unit

∴

σ b = 0.000972222222222222MPa

LAST Step Rounding Answer

∴

σ b = 0.001MPa

Bending Stress using Eccentric Load and Eccentricity Formula Elements

Variables

Bending Stress in Column

Bending Stress in Column is the normal stress that is induced at a point in a body subjected to loads that cause it to bend.

Symbol: σ_b

Measurement: PressureUnit: MPa

Note: Value should be greater than 0.

Formulas to find Bending Stress in Column

Eccentric load on column

Eccentric load on column is the load that causes direct stress as well as bending stress.

Symbol: P

Measurement: ForceUnit: kN

Note: Value can be positive or negative.

Formulas to find Eccentric load on column

Eccentricity of Loading

Eccentricity of Loading is the distance between the actual line of action of loads and the line of action that would produce a uniform stress over the cross section of the specimen.

Symbol: e_load

Measurement: LengthUnit: mm

Note: Value should be greater than 0.

Formulas to find Eccentricity of Loading

Depth of Column

Depth of Column is the distance from the top or surface to the bottom of something.

Symbol: h

Measurement: LengthUnit: mm

Note: Value should be greater than 0.

Formulas to find Depth of Column

Width of column

Width of column is describing how wide the column is.

Symbol: b

Measurement: LengthUnit: mm

Note: Value should be greater than 0.

Formulas to find Width of column

Other Formulas to find Bending Stress in Column

Go Bending Stress given Moment due to Load

σ b = \frac{6 \cdot M}{h \cdot (b^{2})}

Other formulas in Rectangular Section Is Subjected to Eccentric Load category

Go Eccentricity using Minimum Stress

e load = (1 - (σ min \cdot \frac{A sectional}{P})) \cdot (\frac{b}{6})

Go Eccentric Load using Minimum Stress

P = \frac{σ min \cdot A sectional}{1 - (6 \cdot \frac{e load}{b})}

Go Minimum Stress using Eccentric Load and Eccentricity

σ min = \frac{P \cdot (1 - (6 \cdot \frac{e load}{b}))}{A sectional}

Go Minimum stress

σ min = (σ - σ b)

How to Evaluate Bending Stress using Eccentric Load and Eccentricity?

Bending Stress using Eccentric Load and Eccentricity evaluator uses Bending Stress in Column = (6*Eccentric load on column*Eccentricity of Loading)/(Depth of Column*(Width of column^2)) to evaluate the Bending Stress in Column, The Bending Stress using Eccentric Load and Eccentricity formula is defined as a more specific type of normal stress. Bending Stress in Column is denoted by σ_b symbol.

How to evaluate Bending Stress using Eccentric Load and Eccentricity using this online evaluator? To use this online evaluator for Bending Stress using Eccentric Load and Eccentricity, enter Eccentric load on column (P), Eccentricity of Loading (e_load), Depth of Column (h) & Width of column (b) and hit the calculate button.

FAQs on Bending Stress using Eccentric Load and Eccentricity

What is the formula to find Bending Stress using Eccentric Load and Eccentricity?

The formula of Bending Stress using Eccentric Load and Eccentricity is expressed as Bending Stress in Column = (6*Eccentric load on column*Eccentricity of Loading)/(Depth of Column*(Width of column^2)). Here is an example- 7.8E-9 = (6*7000*0.025)/(3*(0.6^2)).

How to calculate Bending Stress using Eccentric Load and Eccentricity?

With Eccentric load on column (P), Eccentricity of Loading (e_load), Depth of Column (h) & Width of column (b) we can find Bending Stress using Eccentric Load and Eccentricity using the formula - Bending Stress in Column = (6*Eccentric load on column*Eccentricity of Loading)/(Depth of Column*(Width of column^2)).

What are the other ways to Calculate Bending Stress in Column?

Here are the different ways to Calculate Bending Stress in Column-

Bending Stress in Column=(6*Moment due to eccentric load)/(Depth of Column*(Width of column^2))

Can the Bending Stress using Eccentric Load and Eccentricity be negative?

No, the Bending Stress using Eccentric Load and Eccentricity, measured in Pressure cannot be negative.

Which unit is used to measure Bending Stress using Eccentric Load and Eccentricity?

Bending Stress using Eccentric Load and Eccentricity is usually measured using the Megapascal[MPa] for Pressure. Pascal[MPa], Kilopascal[MPa], Bar[MPa] are the few other units in which Bending Stress using Eccentric Load and Eccentricity can be measured.

Let Others Know

✖

Facebook

Twitter

Copied!

Bending Stress using Eccentric Load and Eccentricity Formula

​GoBending Stress given Moment due to Load Formula

Bending Stress using Eccentric Load and Eccentricity Example

Bending Stress using Eccentric Load and Eccentricity Solution

Bending Stress using Eccentric Load and Eccentricity Formula Elements

Other Formulas to find Bending Stress in Column

Other formulas in Rectangular Section Is Subjected to Eccentric Load category

How to Evaluate Bending Stress using Eccentric Load and Eccentricity?

FAQs on Bending Stress using Eccentric Load and Eccentricity

Variable Name

GoBending Stress given Moment due to Load Formula