FormulaDen.com

Physics Chemistry Math Chemical Engineering Civil Electrical Electronics Electronics and Instrumentation Materials Science Mechanical Production Engineering Financial Health

Bending Moment of Cantilever Beam Subjected to UDL at Any Point from Free End Formula

GoMaximum Bending Moment of Simply Supported Beams with Point Load at Centre Formula

GoMaximum Bending Moment of Simply Supported Beam with Uniformly Distributed Load Formula

Fx Copy

LaTeX Copy

Bending Moment is the reaction induced in a structural element when an external force or moment is applied to the element, causing the element to bend. Check FAQs

M = (\frac{w \cdot x^{2}}{2})

M - Bending Moment?w - Load per Unit Length?x - Distance x from Support?

Bending Moment of Cantilever Beam Subjected to UDL at Any Point from Free End Example

With values

With units

Only example

Here is how the Bending Moment of Cantilever Beam Subjected to UDL at Any Point from Free End equation looks like with Values.

Here is how the Bending Moment of Cantilever Beam Subjected to UDL at Any Point from Free End equation looks like with Units.

Here is how the Bending Moment of Cantilever Beam Subjected to UDL at Any Point from Free End equation looks like.

57.0037 = (\frac{67.46 \cdot 1300^{2}}{2})

57.0037kN*m = (\frac{67.46kN/m \cdot {1300mm}^{2}}{2})

57.0037 = (\frac{67.46 \cdot 1300^{2}}{2})

Tip: Use pencil ( Pencil

) icon above to edit Input Values and Units.

Calculate

Recalculate

Solution

Copy

Reset

You are here -

Home » Category

Engineering » Category

Civil » Category

Strength of Materials » fx Bending Moment of Cantilever Beam Subjected to UDL at Any Point from Free End

Bending Moment of Cantilever Beam Subjected to UDL at Any Point from Free End Solution

Follow our step by step solution on how to calculate Bending Moment of Cantilever Beam Subjected to UDL at Any Point from Free End?

FIRST Step Consider the formula

M = (\frac{w \cdot x^{2}}{2})

Next Step Substitute values of Variables

∴

M = (\frac{67.46kN/m \cdot {1300mm}^{2}}{2})

Next Step Convert Units

∴

M = (\frac{67460N/m \cdot {1.3m}^{2}}{2})

Next Step Prepare to Evaluate

∴

M = (\frac{67460 \cdot {1.3}^{2}}{2})

Next Step Evaluate

∴

M = 57003.7N*m

LAST Step Convert to Output's Unit

∴

M = 57.0037kN*m

Bending Moment of Cantilever Beam Subjected to UDL at Any Point from Free End Formula Elements

Variables

Bending Moment

Bending Moment is the reaction induced in a structural element when an external force or moment is applied to the element, causing the element to bend.

Symbol: M

Measurement: Moment of ForceUnit: kN*m

Note: Value can be positive or negative.

Formulas to find Bending Moment

Load per Unit Length

Load per Unit Length is the load distributed per unit meter.

Symbol: w

Measurement: Surface TensionUnit: kN/m

Note: Value can be positive or negative.

Formulas to find Load per Unit Length

Distance x from Support

Distance x from Support is the length of a beam from the support to any point on the beam.

Symbol: x

Measurement: LengthUnit: mm

Note: Value should be greater than 0.

Formulas to find Distance x from Support

Other Formulas to find Bending Moment

Go Maximum Bending Moment of Simply Supported Beams with Point Load at Centre

M = \frac{P \cdot L}{4}

Go Maximum Bending Moment of Simply Supported Beam with Uniformly Distributed Load

M = \frac{w \cdot L^{2}}{8}

Go Maximum Bending Moment of Simply Supported Beams with Uniformly Varying Load

M = \frac{q \cdot L^{2}}{9 \cdot \sqrt{3}}

Go Maximum Bending Moment of Cantilever Beam Subjected to Point Load at Free End

M = P \cdot L

Other formulas in Beam Moments category

Go Moment on Fixed End of Fixed Beam having Point Load at Center

FEM = \frac{P \cdot L}{8}

Go Moment on Fixed End of Fixed Beam having UDL over Entire Length

FEM = \frac{w \cdot (L^{2})}{12}

Go Fixed End Moment at Left Support with Point Load at Certain Distance from Left Support

FEM = (\frac{P \cdot (b^{2}) \cdot a}{L^{2}})

Go Fixed End Moment at Left Support Carrying Right Angled Triangular Load at Right Angled End A

FEM = \frac{q \cdot (L^{2})}{20}

How to Evaluate Bending Moment of Cantilever Beam Subjected to UDL at Any Point from Free End?

Bending Moment of Cantilever Beam Subjected to UDL at Any Point from Free End evaluator uses Bending Moment = ((Load per Unit Length*Distance x from Support^2)/2) to evaluate the Bending Moment, The Bending Moment of Cantilever Beam Subjected to UDL at Any Point from Free End formula is defined as a reaction induced in a structural element when an external force or moment is applied to the element, causing the element to bend. Bending Moment is denoted by M symbol.

How to evaluate Bending Moment of Cantilever Beam Subjected to UDL at Any Point from Free End using this online evaluator? To use this online evaluator for Bending Moment of Cantilever Beam Subjected to UDL at Any Point from Free End, enter Load per Unit Length (w) & Distance x from Support (x) and hit the calculate button.

FAQs on Bending Moment of Cantilever Beam Subjected to UDL at Any Point from Free End

What is the formula to find Bending Moment of Cantilever Beam Subjected to UDL at Any Point from Free End?

The formula of Bending Moment of Cantilever Beam Subjected to UDL at Any Point from Free End is expressed as Bending Moment = ((Load per Unit Length*Distance x from Support^2)/2). Here is an example- 0.057004 = ((67460*1.3^2)/2).

How to calculate Bending Moment of Cantilever Beam Subjected to UDL at Any Point from Free End?

With Load per Unit Length (w) & Distance x from Support (x) we can find Bending Moment of Cantilever Beam Subjected to UDL at Any Point from Free End using the formula - Bending Moment = ((Load per Unit Length*Distance x from Support^2)/2).

What are the other ways to Calculate Bending Moment?

Here are the different ways to Calculate Bending Moment-

Bending Moment=(Point Load*Length of Beam)/4
Bending Moment=(Load per Unit Length*Length of Beam^2)/8
Bending Moment=(Uniformly Varying Load*Length of Beam^2)/(9*sqrt(3))

Can the Bending Moment of Cantilever Beam Subjected to UDL at Any Point from Free End be negative?

Yes, the Bending Moment of Cantilever Beam Subjected to UDL at Any Point from Free End, measured in Moment of Force can be negative.

Which unit is used to measure Bending Moment of Cantilever Beam Subjected to UDL at Any Point from Free End?

Bending Moment of Cantilever Beam Subjected to UDL at Any Point from Free End is usually measured using the Kilonewton Meter[kN*m] for Moment of Force. Newton Meter[kN*m], Millinewton Meter[kN*m], Micronewton Meter[kN*m] are the few other units in which Bending Moment of Cantilever Beam Subjected to UDL at Any Point from Free End can be measured.

Let Others Know

✖

Facebook

Twitter

Copied!