FormulaDen.com

Physics Chemistry Math Chemical Engineering Civil Electrical Electronics Electronics and Instrumentation Materials Science Mechanical Production Engineering Financial Health

Average Load on Pipe due to Wheel Load Formula

Fx Copy

LaTeX Copy

Average Load on Pipe in Newton per Meter is the average of all the loads applied on the pipe due to different components considered in environmental engineering. Check FAQs

W avg = \frac{I e \cdot C t \cdot P wheel}{L eff}

W_avg - Average Load on Pipe in Newton per Meter?I_e - Impact Factor?C_t - Load Coefficient?P_wheel - Concentrated Wheel Load?L_eff - Effective Length of Pipe?

Average Load on Pipe due to Wheel Load Example

With values

With units

Only example

Here is how the Average Load on Pipe due to Wheel Load equation looks like with Values.

Here is how the Average Load on Pipe due to Wheel Load equation looks like with Units.

Here is how the Average Load on Pipe due to Wheel Load equation looks like.

40.95 = \frac{2.73 \cdot 10 \cdot 75.375}{50.25}

40.95N/m = \frac{2.73 \cdot 10 \cdot 75.375N}{50.25m}

40.95 = \frac{2.73 \cdot 10 \cdot 75.375}{50.25}

Tip: Use pencil ( Pencil

) icon above to edit Input Values and Units.

Calculate

Recalculate

Solution

Copy

Reset

You are here -

Home » Category

Engineering » Category

Civil » Category

Environmental Engineering » fx Average Load on Pipe due to Wheel Load

Average Load on Pipe due to Wheel Load Solution

Follow our step by step solution on how to calculate Average Load on Pipe due to Wheel Load?

FIRST Step Consider the formula

W avg = \frac{I e \cdot C t \cdot P wheel}{L eff}

Next Step Substitute values of Variables

∴

W avg = \frac{2.73 \cdot 10 \cdot 75.375N}{50.25m}

Next Step Prepare to Evaluate

∴

W avg = \frac{2.73 \cdot 10 \cdot 75.375}{50.25}

LAST Step Evaluate

∴

W avg = 40.95N/m

Average Load on Pipe due to Wheel Load Formula Elements

Variables

Average Load on Pipe in Newton per Meter

Average Load on Pipe in Newton per Meter is the average of all the loads applied on the pipe due to different components considered in environmental engineering.

Symbol: W_avg

Measurement: Surface TensionUnit: N/m

Note: Value should be greater than 0.

Formulas to find Average Load on Pipe in Newton per Meter

Impact Factor

Impact Factor is used as a constant in calculation of average load on pipe.

Symbol: I_e

Measurement: NAUnit: Unitless

Note: Value should be greater than 0.

Formulas to find Impact Factor

Load Coefficient

Load Coefficient is dependent on the length and width of the conduit cross section and the depth of the cover over.

Symbol: C_t

Measurement: NAUnit: Unitless

Note: Value can be positive or negative.

Formulas to find Load Coefficient

Concentrated Wheel Load

Concentrated Wheel Load is single loads that act over a relatively small area.

Symbol: P_wheel

Measurement: ForceUnit: N

Note: Value should be greater than 0.

Formulas to find Concentrated Wheel Load

Effective Length of Pipe

Effective Length of Pipe is the length of pipe of the same size as the fitting that would give rise to the same pressure drop as the fitting.

Symbol: L_eff

Measurement: LengthUnit: m

Note: Value should be greater than 0.

Formulas to find Effective Length of Pipe

Other formulas in Stresses Due to External Loads category

Go Load per Meter Length of Pipe

w' = C s \cdot Y F \cdot {(B)}^{2}

Go Unit Weight of Backfill Material for Load per Meter Length of Pipe

Y F = \frac{w'}{C s \cdot {(B)}^{2}}

Go Width of Trench for Load per Meter Length of Pipe

B = \sqrt{\frac{w'}{C s \cdot Y F}}

Go Constant which depend upon type of Soil for Load per meter Length of Pipe

C s = \frac{w'}{Y F \cdot {(B)}^{2}}

How to Evaluate Average Load on Pipe due to Wheel Load?

Average Load on Pipe due to Wheel Load evaluator uses Average Load on Pipe in Newton per Meter = (Impact Factor*Load Coefficient*Concentrated Wheel Load)/Effective Length of Pipe to evaluate the Average Load on Pipe in Newton per Meter, The Average Load on Pipe due to Wheel Load formula is defined as the value of average force exerted on a pipe by wheels or other rolling loads passing over it. Average Load on Pipe in Newton per Meter is denoted by W_avg symbol.

How to evaluate Average Load on Pipe due to Wheel Load using this online evaluator? To use this online evaluator for Average Load on Pipe due to Wheel Load, enter Impact Factor (I_e), Load Coefficient (C_t), Concentrated Wheel Load (P_wheel) & Effective Length of Pipe (L_eff) and hit the calculate button.

FAQs on Average Load on Pipe due to Wheel Load

What is the formula to find Average Load on Pipe due to Wheel Load?

The formula of Average Load on Pipe due to Wheel Load is expressed as Average Load on Pipe in Newton per Meter = (Impact Factor*Load Coefficient*Concentrated Wheel Load)/Effective Length of Pipe. Here is an example- 40.95 = (2.73*10*75.375)/50.25.

How to calculate Average Load on Pipe due to Wheel Load?

With Impact Factor (I_e), Load Coefficient (C_t), Concentrated Wheel Load (P_wheel) & Effective Length of Pipe (L_eff) we can find Average Load on Pipe due to Wheel Load using the formula - Average Load on Pipe in Newton per Meter = (Impact Factor*Load Coefficient*Concentrated Wheel Load)/Effective Length of Pipe.

Can the Average Load on Pipe due to Wheel Load be negative?

No, the Average Load on Pipe due to Wheel Load, measured in Surface Tension cannot be negative.

Which unit is used to measure Average Load on Pipe due to Wheel Load?

Average Load on Pipe due to Wheel Load is usually measured using the Newton per Meter[N/m] for Surface Tension. Millinewton per Meter[N/m], Gram-Force per Centimeter[N/m], Dyne per Centimeter[N/m] are the few other units in which Average Load on Pipe due to Wheel Load can be measured.

Let Others Know

✖

Facebook

Twitter

Copied!

Average Load on Pipe due to Wheel Load Formula

Average Load on Pipe due to Wheel Load Example

Average Load on Pipe due to Wheel Load Solution

Average Load on Pipe due to Wheel Load Formula Elements

Other formulas in Stresses Due to External Loads category

How to Evaluate Average Load on Pipe due to Wheel Load?

FAQs on Average Load on Pipe due to Wheel Load

Variable Name