FormulaDen.com

Physics Chemistry Math Chemical Engineering Civil Electrical Electronics Electronics and Instrumentation Materials Science Mechanical Production Engineering Financial Health

Area of Surface for Average Drag Coefficient Formula

Fx Copy

LaTeX Copy

Area of Surface for boundary layer flow is the surface of the object where the drag force takes place due to the boundary layer. Check FAQs

A = \frac{F D}{\frac{1}{2} \cdot C D \cdot ρ f \cdot {V ∞}^{2}}

A - Area of Surface for Boundary Layer Flow?F_D - Drag Force on Boundary Layer Flow Plate?C_D - Coefficient of Drag for Boundary Layer Flow?ρ_f - Fluid Density for Boundary Layer Flow?V_∞ - Freestream Velocity for Boundary Layer Flow?

Area of Surface for Average Drag Coefficient Example

With values

With units

Only example

Here is how the Area of Surface for Average Drag Coefficient equation looks like with Values.

Here is how the Area of Surface for Average Drag Coefficient equation looks like with Units.

Here is how the Area of Surface for Average Drag Coefficient equation looks like.

0.7948 = \frac{0.03}{\frac{1}{2} \cdot 0.0038 \cdot 890 \cdot {0.15}^{2}}

0.7948m² = \frac{0.03N}{\frac{1}{2} \cdot 0.0038 \cdot 890kg/m³ \cdot {0.15m/s}^{2}}

0.7948 = \frac{0.03}{\frac{1}{2} \cdot 0.0038 \cdot 890 \cdot {0.15}^{2}}

Tip: Use pencil ( Pencil

) icon above to edit Input Values and Units.

Calculate

Recalculate

Solution

Copy

Reset

You are here -

Home » Category

Physics » Category

Mechanical » Category

Fluid Mechanics » fx Area of Surface for Average Drag Coefficient

Area of Surface for Average Drag Coefficient Solution

Follow our step by step solution on how to calculate Area of Surface for Average Drag Coefficient?

FIRST Step Consider the formula

A = \frac{F D}{\frac{1}{2} \cdot C D \cdot ρ f \cdot {V ∞}^{2}}

Next Step Substitute values of Variables

∴

A = \frac{0.03N}{\frac{1}{2} \cdot 0.0038 \cdot 890kg/m³ \cdot {0.15m/s}^{2}}

Next Step Prepare to Evaluate

∴

A = \frac{0.03}{\frac{1}{2} \cdot 0.0038 \cdot 890 \cdot {0.15}^{2}}

Next Step Evaluate

∴

A = 0.794762515025979m²

LAST Step Rounding Answer

∴

A = 0.7948m²

Area of Surface for Average Drag Coefficient Formula Elements

Variables

Area of Surface for Boundary Layer Flow

Area of Surface for boundary layer flow is the surface of the object where the drag force takes place due to the boundary layer.

Symbol: A

Measurement: AreaUnit: m²

Note: Value should be greater than 0.

Formulas to find Area of Surface for Boundary Layer Flow

Drag Force on Boundary Layer Flow Plate

Drag Force on Boundary Layer Flow Plate is the resisting force experienced by an object moving through a fluid.

Symbol: F_D

Measurement: ForceUnit: N

Note: Value should be greater than 0.

Formulas to find Drag Force on Boundary Layer Flow Plate

Coefficient of Drag for Boundary Layer Flow

Coefficient of drag for boundary layer flow is a dimensionless quantity that is used to quantify the drag or resistance of an object in a fluid environment, such as air or water.

Symbol: C_D

Measurement: NAUnit: Unitless

Note: Value should be greater than 0.

Formulas to find Coefficient of Drag for Boundary Layer Flow

Fluid Density for Boundary Layer Flow

Fluid density for boundary layer flow is defined as the mass of fluid per unit volume of the fluid.

Symbol: ρ_f

Measurement: DensityUnit: kg/m³

Note: Value should be greater than 0.

Formulas to find Fluid Density for Boundary Layer Flow

Freestream Velocity for Boundary Layer Flow

Freestream velocity for boundary layer flow is the velocity of fluid far upstream of a body, that is before the body has a chance to deflect, slow down the fluid.

Symbol: V_∞

Measurement: SpeedUnit: m/s

Note: Value should be greater than 0.

Formulas to find Freestream Velocity for Boundary Layer Flow

Other formulas in Boundary Layer Flow category

Go Reynold Number at End of Plate

R e = \frac{ρ f \cdot V ∞ \cdot L}{μ}

Go Length of Plate for Reynold Number

L = \frac{R e \cdot μ}{ρ f \cdot V ∞}

Go Velocity of Fluid for Reynold Number

V ∞ = \frac{R e \cdot μ}{ρ f \cdot L}

Go Thickness of Boundary Layer

𝛿 = \frac{5.48 \cdot x}{\sqrt{R e}}

How to Evaluate Area of Surface for Average Drag Coefficient?

Area of Surface for Average Drag Coefficient evaluator uses Area of Surface for Boundary Layer Flow = Drag Force on Boundary Layer Flow Plate/(1/2*Coefficient of Drag for Boundary Layer Flow*Fluid Density for Boundary Layer Flow*Freestream Velocity for Boundary Layer Flow^2) to evaluate the Area of Surface for Boundary Layer Flow, The Area of surface for average drag coefficient is known while considering the ratio of drag force to the coefficient of drag, half the density of the fluid, and the free stream velocity. Area of Surface for Boundary Layer Flow is denoted by A symbol.

How to evaluate Area of Surface for Average Drag Coefficient using this online evaluator? To use this online evaluator for Area of Surface for Average Drag Coefficient, enter Drag Force on Boundary Layer Flow Plate (F_D), Coefficient of Drag for Boundary Layer Flow (C_D), Fluid Density for Boundary Layer Flow (ρ_f) & Freestream Velocity for Boundary Layer Flow (V_∞) and hit the calculate button.

FAQs on Area of Surface for Average Drag Coefficient

What is the formula to find Area of Surface for Average Drag Coefficient?

The formula of Area of Surface for Average Drag Coefficient is expressed as Area of Surface for Boundary Layer Flow = Drag Force on Boundary Layer Flow Plate/(1/2*Coefficient of Drag for Boundary Layer Flow*Fluid Density for Boundary Layer Flow*Freestream Velocity for Boundary Layer Flow^2). Here is an example- 0.794763 = 0.03/(1/2*0.00377*890*0.15^2).

How to calculate Area of Surface for Average Drag Coefficient?

With Drag Force on Boundary Layer Flow Plate (F_D), Coefficient of Drag for Boundary Layer Flow (C_D), Fluid Density for Boundary Layer Flow (ρ_f) & Freestream Velocity for Boundary Layer Flow (V_∞) we can find Area of Surface for Average Drag Coefficient using the formula - Area of Surface for Boundary Layer Flow = Drag Force on Boundary Layer Flow Plate/(1/2*Coefficient of Drag for Boundary Layer Flow*Fluid Density for Boundary Layer Flow*Freestream Velocity for Boundary Layer Flow^2).

Can the Area of Surface for Average Drag Coefficient be negative?

No, the Area of Surface for Average Drag Coefficient, measured in Area cannot be negative.

Which unit is used to measure Area of Surface for Average Drag Coefficient?

Area of Surface for Average Drag Coefficient is usually measured using the Square Meter[m²] for Area. Square Kilometer[m²], Square Centimeter[m²], Square Millimeter[m²] are the few other units in which Area of Surface for Average Drag Coefficient can be measured.

Let Others Know

✖

Facebook

Twitter

Copied!

: Value
: Unit

Area of Surface for Average Drag Coefficient Formula

Area of Surface for Average Drag Coefficient Example

Area of Surface for Average Drag Coefficient Solution

Area of Surface for Average Drag Coefficient Formula Elements

Other formulas in Boundary Layer Flow category

How to Evaluate Area of Surface for Average Drag Coefficient?

FAQs on Area of Surface for Average Drag Coefficient

Variable Name