FormulaDen.com

Physics Chemistry Math Chemical Engineering Civil Electrical Electronics Electronics and Instrumentation Materials Science Mechanical Production Engineering Financial Health

Area of Steel in RCC Circular Water Tank Formula

Fx Copy

LaTeX Copy

Area of Steel Reinforcement is the cross-sectional area of steel reinforcement. Check FAQs

A st = \frac{d \cdot h \cdot (\frac{D}{2})}{σ st}

A_st - Area of Steel Reinforcement?d - Density of Water?h - Depth of Water in Water Tank?D - Diameter of Tank?σ_st - Permissible Compressive Stress in Steel?

Area of Steel in RCC Circular Water Tank Example

With values

With units

Only example

Here is how the Area of Steel in RCC Circular Water Tank equation looks like with Values.

Here is how the Area of Steel in RCC Circular Water Tank equation looks like with Units.

Here is how the Area of Steel in RCC Circular Water Tank equation looks like.

0.0006 = \frac{10 \cdot 3 \cdot (\frac{4}{2})}{100}

0.0006m² = \frac{10kN/m³ \cdot 3m \cdot (\frac{4m}{2})}{100N/mm²}

0.0006 = \frac{10 \cdot 3 \cdot (\frac{4}{2})}{100}

Tip: Use pencil ( Pencil

) icon above to edit Input Values and Units.

Calculate

Recalculate

Solution

Copy

Reset

You are here -

Home » Category

Engineering » Category

Civil » Category

Design of Steel Structures » fx Area of Steel in RCC Circular Water Tank

Area of Steel in RCC Circular Water Tank Solution

Follow our step by step solution on how to calculate Area of Steel in RCC Circular Water Tank?

FIRST Step Consider the formula

A st = \frac{d \cdot h \cdot (\frac{D}{2})}{σ st}

Next Step Substitute values of Variables

∴

A st = \frac{10kN/m³ \cdot 3m \cdot (\frac{4m}{2})}{100N/mm²}

Next Step Convert Units

∴

A st = \frac{10000N/m³ \cdot 3m \cdot (\frac{4m}{2})}{1E+8Pa}

Next Step Prepare to Evaluate

∴

A st = \frac{10000 \cdot 3 \cdot (\frac{4}{2})}{1E+8}

LAST Step Evaluate

∴

A st = 0.0006m²

Area of Steel in RCC Circular Water Tank Formula Elements

Variables

Area of Steel Reinforcement

Area of Steel Reinforcement is the cross-sectional area of steel reinforcement.

Symbol: A_st

Measurement: AreaUnit: m²

Note: Value should be greater than 0.

Formulas to find Area of Steel Reinforcement

Density of Water

Density of Water is mass per unit of water in kilonewton per meter.

Symbol: d

Measurement: Specific WeightUnit: kN/m³

Note: Value should be greater than 0.

Formulas to find Density of Water

Depth of Water in Water Tank

The Depth of Water in Water Tank measured above the impermeable layer.

Symbol: h

Measurement: LengthUnit: m

Note: Value should be greater than 0.

Formulas to find Depth of Water in Water Tank

Diameter of Tank

The Diameter of Tank is the maximum width of the circular water tank in meters.

Symbol: D

Measurement: LengthUnit: m

Note: Value should be greater than 0.

Formulas to find Diameter of Tank

Permissible Compressive Stress in Steel

The Permissible Compressive Stress in Steel is the design constant of a circular water tank, which is used in the calculation to find out the area of the steel of a circular tank.

Symbol: σ_st

Measurement: PressureUnit: N/mm²

Note: Value can be positive or negative.

Formulas to find Permissible Compressive Stress in Steel

Other formulas in Design Procedure for Circular Water Tank category

Go Hoop Tension generated in RCC Circular Water Tank

H t = \frac{d \cdot h \cdot D}{2}

How to Evaluate Area of Steel in RCC Circular Water Tank?

Area of Steel in RCC Circular Water Tank evaluator uses Area of Steel Reinforcement = (Density of Water*Depth of Water in Water Tank*(Diameter of Tank/2))/Permissible Compressive Stress in Steel to evaluate the Area of Steel Reinforcement, The Area of Steel in RCC Circular Water Tank formula is the hoop tension by the permissible compressive stress in steel. Area of Steel Reinforcement is denoted by A_st symbol.

How to evaluate Area of Steel in RCC Circular Water Tank using this online evaluator? To use this online evaluator for Area of Steel in RCC Circular Water Tank, enter Density of Water (d), Depth of Water in Water Tank (h), Diameter of Tank (D) & Permissible Compressive Stress in Steel (σ_st) and hit the calculate button.

FAQs on Area of Steel in RCC Circular Water Tank

What is the formula to find Area of Steel in RCC Circular Water Tank?

The formula of Area of Steel in RCC Circular Water Tank is expressed as Area of Steel Reinforcement = (Density of Water*Depth of Water in Water Tank*(Diameter of Tank/2))/Permissible Compressive Stress in Steel. Here is an example- 0.0006 = (10000*3*(4/2))/100000000.

How to calculate Area of Steel in RCC Circular Water Tank?

With Density of Water (d), Depth of Water in Water Tank (h), Diameter of Tank (D) & Permissible Compressive Stress in Steel (σ_st) we can find Area of Steel in RCC Circular Water Tank using the formula - Area of Steel Reinforcement = (Density of Water*Depth of Water in Water Tank*(Diameter of Tank/2))/Permissible Compressive Stress in Steel.

Can the Area of Steel in RCC Circular Water Tank be negative?

No, the Area of Steel in RCC Circular Water Tank, measured in Area cannot be negative.

Which unit is used to measure Area of Steel in RCC Circular Water Tank?

Area of Steel in RCC Circular Water Tank is usually measured using the Square Meter[m²] for Area. Square Kilometer[m²], Square Centimeter[m²], Square Millimeter[m²] are the few other units in which Area of Steel in RCC Circular Water Tank can be measured.

Let Others Know

✖

Facebook

Twitter

Copied!

: Value
: Unit

Area of Steel in RCC Circular Water Tank Formula

Area of Steel in RCC Circular Water Tank Example

Area of Steel in RCC Circular Water Tank Solution

Area of Steel in RCC Circular Water Tank Formula Elements

Other formulas in Design Procedure for Circular Water Tank category

How to Evaluate Area of Steel in RCC Circular Water Tank?

FAQs on Area of Steel in RCC Circular Water Tank

Variable Name