FormulaDen.com

Physics Chemistry Math Chemical Engineering Civil Electrical Electronics Electronics and Instrumentation Materials Science Mechanical Production Engineering Financial Health

Area of Flange or Area above Considered Section Formula

Fx Copy

LaTeX Copy

Area of Section above Considered Level is the geometric area of a section of a system (such as a tank, basin, or duct) above a specific level. This level is often a reference point for analysis. Check FAQs

A abv = B \cdot (\frac{D}{2} - y)

A_abv - Area of Section above Considered Level?B - Width of Beam Section?D - Outer Depth of I section?y - Distance from Neutral Axis?

Area of Flange or Area above Considered Section Example

With values

With units

Only example

Here is how the Area of Flange or Area above Considered Section equation looks like with Values.

Here is how the Area of Flange or Area above Considered Section equation looks like with Units.

Here is how the Area of Flange or Area above Considered Section equation looks like.

449500 = 100 \cdot (\frac{9000}{2} - 5)

449500mm² = 100mm \cdot (\frac{9000mm}{2} - 5mm)

449500 = 100 \cdot (\frac{9000}{2} - 5)

Tip: Use pencil ( Pencil

) icon above to edit Input Values and Units.

Calculate

Recalculate

Solution

Copy

Reset

You are here -

Home » Category

Physics » Category

Mechanical » Category

Strength of Materials » fx Area of Flange or Area above Considered Section

Area of Flange or Area above Considered Section Solution

Follow our step by step solution on how to calculate Area of Flange or Area above Considered Section?

FIRST Step Consider the formula

A abv = B \cdot (\frac{D}{2} - y)

Next Step Substitute values of Variables

∴

A abv = 100mm \cdot (\frac{9000mm}{2} - 5mm)

Next Step Convert Units

∴

A abv = 0.1m \cdot (\frac{9m}{2} - 0.005m)

Next Step Prepare to Evaluate

∴

A abv = 0.1 \cdot (\frac{9}{2} - 0.005)

Next Step Evaluate

∴

A abv = 0.4495m²

LAST Step Convert to Output's Unit

∴

A abv = 449500mm²

Area of Flange or Area above Considered Section Formula Elements

Variables

Area of Section above Considered Level

Area of Section above Considered Level is the geometric area of a section of a system (such as a tank, basin, or duct) above a specific level. This level is often a reference point for analysis.

Symbol: A_abv

Measurement: AreaUnit: mm²

Note: Value should be greater than 0.

Formulas to find Area of Section above Considered Level

Width of Beam Section

Width of Beam Section is the width of the rectangular cross-section of the beam parallel to the axis in consideration.

Symbol: B

Measurement: LengthUnit: mm

Note: Value should be greater than 0.

Formulas to find Width of Beam Section

Outer Depth of I section

The Outer Depth of I section is a measure of distance, the distance between the outer bars of the I-section.

Symbol: D

Measurement: LengthUnit: mm

Note: Value should be greater than 0.

Formulas to find Outer Depth of I section

Distance from Neutral Axis

Distance from Neutral Axis is the distance of the considered layer from the neutral layer.

Symbol: y

Measurement: LengthUnit: mm

Note: Value can be positive or negative.

Formulas to find Distance from Neutral Axis

Other formulas in Shear Stress Distribution in Flange category

Go Inner Depth of I-section given Shear Stress in Lower Edge of Flange

d = \sqrt{D^{2} - \frac{8 \cdot I}{F s} \cdot 𝜏 beam}

Go Outer Depth of I section given Shear Stress in Lower Edge of Flange

D = \sqrt{\frac{8 \cdot I}{F s} \cdot 𝜏 beam + d^{2}}

Go Moment of Inertia of I section given Shear Stress in Lower Edge of Flange

I = \frac{F s}{8 \cdot 𝜏 beam} \cdot (D^{2} - d^{2})

Go Shear Force in Lower Edge of Flange in I-section

F s = \frac{8 \cdot I \cdot 𝜏 beam}{D^{2} - d^{2}}

How to Evaluate Area of Flange or Area above Considered Section?

Area of Flange or Area above Considered Section evaluator uses Area of Section above Considered Level = Width of Beam Section*(Outer Depth of I section/2-Distance from Neutral Axis) to evaluate the Area of Section above Considered Level, The Area of Flange or Area above Considered Section formula is defined as a measure of the cross-sectional area above the considered section in an I-shaped beam, which is essential in calculating the shear stress and other structural properties of the beam. Area of Section above Considered Level is denoted by A_abv symbol.

How to evaluate Area of Flange or Area above Considered Section using this online evaluator? To use this online evaluator for Area of Flange or Area above Considered Section, enter Width of Beam Section (B), Outer Depth of I section (D) & Distance from Neutral Axis (y) and hit the calculate button.

FAQs on Area of Flange or Area above Considered Section

What is the formula to find Area of Flange or Area above Considered Section?

The formula of Area of Flange or Area above Considered Section is expressed as Area of Section above Considered Level = Width of Beam Section*(Outer Depth of I section/2-Distance from Neutral Axis). Here is an example- 4.5E+11 = 0.1*(9/2-0.005).

How to calculate Area of Flange or Area above Considered Section?

With Width of Beam Section (B), Outer Depth of I section (D) & Distance from Neutral Axis (y) we can find Area of Flange or Area above Considered Section using the formula - Area of Section above Considered Level = Width of Beam Section*(Outer Depth of I section/2-Distance from Neutral Axis).

Can the Area of Flange or Area above Considered Section be negative?

No, the Area of Flange or Area above Considered Section, measured in Area cannot be negative.

Which unit is used to measure Area of Flange or Area above Considered Section?

Area of Flange or Area above Considered Section is usually measured using the Square Millimeter[mm²] for Area. Square Meter[mm²], Square Kilometer[mm²], Square Centimeter[mm²] are the few other units in which Area of Flange or Area above Considered Section can be measured.

Let Others Know

✖

Facebook

Twitter

Copied!

Area of Flange or Area above Considered Section Formula

Area of Flange or Area above Considered Section Example

Area of Flange or Area above Considered Section Solution

Area of Flange or Area above Considered Section Formula Elements

Other formulas in Shear Stress Distribution in Flange category

How to Evaluate Area of Flange or Area above Considered Section?

FAQs on Area of Flange or Area above Considered Section

Variable Name