FormulaDen.com

Physics Chemistry Math Chemical Engineering Civil Electrical Electronics Electronics and Instrumentation Materials Science Mechanical Production Engineering Financial Health

Aquifer Thickness when Discharge is Considered Formula

Fx Copy

LaTeX Copy

The Aquifer Thickness is referred as vertical distance between the top and bottom boundaries of an aquifer, typically measured in feet or meters. Check FAQs

b = q \cdot \frac{L stream}{(h o - h 1) \cdot k}

b - Aquifer Thickness?q - Discharge per Unit Width of Aquifer?L_stream - Length between Upstream and Downstream?h_o - Piezometric Head at Upstream End?h₁ - Piezometric Head at Downstream End?k - Coefficient of Permeability?

Aquifer Thickness when Discharge is Considered Example

With values

With units

Only example

Here is how the Aquifer Thickness when Discharge is Considered equation looks like with Values.

Here is how the Aquifer Thickness when Discharge is Considered equation looks like with Units.

Here is how the Aquifer Thickness when Discharge is Considered equation looks like.

35.0571 = 30 \cdot \frac{4.09}{(12 - 5) \cdot 0.5}

35.0571m = 30m³/s \cdot \frac{4.09m}{(12m - 5m) \cdot 0.5m/s}

35.0571 = 30 \cdot \frac{4.09}{(12 - 5) \cdot 0.5}

Tip: Use pencil ( Pencil

) icon above to edit Input Values and Units.

Calculate

Recalculate

Solution

Copy

Reset

You are here -

Home » Category

Engineering » Category

Civil » Category

Engineering Hydrology » fx Aquifer Thickness when Discharge is Considered

Aquifer Thickness when Discharge is Considered Solution

Follow our step by step solution on how to calculate Aquifer Thickness when Discharge is Considered?

FIRST Step Consider the formula

b = q \cdot \frac{L stream}{(h o - h 1) \cdot k}

Next Step Substitute values of Variables

∴

b = 30m³/s \cdot \frac{4.09m}{(12m - 5m) \cdot 0.5m/s}

Next Step Prepare to Evaluate

∴

b = 30 \cdot \frac{4.09}{(12 - 5) \cdot 0.5}

Next Step Evaluate

∴

b = 35.0571428571429m

LAST Step Rounding Answer

∴

b = 35.0571m

Aquifer Thickness when Discharge is Considered Formula Elements

Variables

Aquifer Thickness

The Aquifer Thickness is referred as vertical distance between the top and bottom boundaries of an aquifer, typically measured in feet or meters.

Symbol: b

Measurement: LengthUnit: m

Note: Value should be greater than 0.

Formulas to find Aquifer Thickness

Discharge per Unit Width of Aquifer

The Discharge per Unit Width of Aquifer refers to the rate of total discharge in the channel to the width considered.

Symbol: q

Measurement: Volumetric Flow RateUnit: m³/s

Note: Value should be greater than 0.

Formulas to find Discharge per Unit Width of Aquifer

Length between Upstream and Downstream

The Length between Upstream and Downstream refers to the horizontal base with a difference in surface elevations.

Symbol: L_stream

Measurement: LengthUnit: m

Note: Value should be greater than 0.

Formulas to find Length between Upstream and Downstream

Piezometric Head at Upstream End

The Piezometric Head at Upstream End refers to the specific measurement of liquid pressure above a vertical datum.

Symbol: h_o

Measurement: LengthUnit: m

Note: Value can be positive or negative.

Formulas to find Piezometric Head at Upstream End

Piezometric Head at Downstream End

The Piezometric Head at Downstream End refers to the specific measurement of liquid pressure above a vertical datum.

Symbol: h₁

Measurement: LengthUnit: m

Note: Value can be positive or negative.

Formulas to find Piezometric Head at Downstream End

Coefficient of Permeability

The Coefficient of Permeability refers to the rate of flow of water under laminar flow conditions through a unit cross-sectional area of a porous medium under a unit hydraulic gradient.

Symbol: k

Measurement: SpeedUnit: m/s

Note: Value should be greater than 0.

Formulas to find Coefficient of Permeability

Other formulas in Confined Groundwater Flow between Water Bodies category

Go Equation of Hydraulic Grade Line in Confined Groundwater Flow

P = h o - (\frac{h o - h 1}{L stream}) \cdot x

Go Discharge per unit width of aquifers

q = (\frac{h o - h 1}{L stream}) \cdot k \cdot b

Go Coefficient of Permeability when Discharge is Considered

k = q \cdot \frac{L stream}{(h o - h 1) \cdot b}

Go Length when Discharge per Unit Width of Aquifer is Considered

L stream = (\frac{h o - h 1}{q}) \cdot k \cdot b

How to Evaluate Aquifer Thickness when Discharge is Considered?

Aquifer Thickness when Discharge is Considered evaluator uses Aquifer Thickness = Discharge per Unit Width of Aquifer*Length between Upstream and Downstream/((Piezometric Head at Upstream End-Piezometric Head at Downstream End)*Coefficient of Permeability) to evaluate the Aquifer Thickness, The Aquifer Thickness when Discharge is Considered formula is defined as the hydrogeological specification of the aquifer that may or may not permits the flow of fluid through it. Aquifer Thickness is denoted by b symbol.

How to evaluate Aquifer Thickness when Discharge is Considered using this online evaluator? To use this online evaluator for Aquifer Thickness when Discharge is Considered, enter Discharge per Unit Width of Aquifer (q), Length between Upstream and Downstream (L_stream), Piezometric Head at Upstream End (h_o), Piezometric Head at Downstream End (h₁) & Coefficient of Permeability (k) and hit the calculate button.

FAQs on Aquifer Thickness when Discharge is Considered

What is the formula to find Aquifer Thickness when Discharge is Considered?

The formula of Aquifer Thickness when Discharge is Considered is expressed as Aquifer Thickness = Discharge per Unit Width of Aquifer*Length between Upstream and Downstream/((Piezometric Head at Upstream End-Piezometric Head at Downstream End)*Coefficient of Permeability). Here is an example- 35.05714 = 30*4.09/((12-5)*0.5).

How to calculate Aquifer Thickness when Discharge is Considered?

With Discharge per Unit Width of Aquifer (q), Length between Upstream and Downstream (L_stream), Piezometric Head at Upstream End (h_o), Piezometric Head at Downstream End (h₁) & Coefficient of Permeability (k) we can find Aquifer Thickness when Discharge is Considered using the formula - Aquifer Thickness = Discharge per Unit Width of Aquifer*Length between Upstream and Downstream/((Piezometric Head at Upstream End-Piezometric Head at Downstream End)*Coefficient of Permeability).

Can the Aquifer Thickness when Discharge is Considered be negative?

No, the Aquifer Thickness when Discharge is Considered, measured in Length cannot be negative.

Which unit is used to measure Aquifer Thickness when Discharge is Considered?

Aquifer Thickness when Discharge is Considered is usually measured using the Meter[m] for Length. Millimeter[m], Kilometer[m], Decimeter[m] are the few other units in which Aquifer Thickness when Discharge is Considered can be measured.

Let Others Know

✖

Facebook

Twitter

Copied!

Aquifer Thickness when Discharge is Considered Formula

Aquifer Thickness when Discharge is Considered Example

Aquifer Thickness when Discharge is Considered Solution

Aquifer Thickness when Discharge is Considered Formula Elements

Other formulas in Confined Groundwater Flow between Water Bodies category

How to Evaluate Aquifer Thickness when Discharge is Considered?

FAQs on Aquifer Thickness when Discharge is Considered

Variable Name