FormulaDen.com

Physics Chemistry Math Chemical Engineering Civil Electrical Electronics Electronics and Instrumentation Materials Science Mechanical Production Engineering Financial Health

Anchorage Slip given Settling Length Formula

GoSlip of Anchorage Formula

Fx Copy

LaTeX Copy

Slip of Anchorage is the distance by which the anchorage gets slipped when the force is transmitted from anchorage to tendon. Check FAQs

Δ = 0.5 \cdot Δf p \cdot \frac{l set}{A p \cdot E s}

Δ - Slip of Anchorage?Δf_p - Prestress Drop?l_set - Settling Length?A_p - Steel Area in Prestress?E_s - Modulus of Elasticity of Steel Reinforcement?

Anchorage Slip given Settling Length Example

With values

With units

Only example

Here is how the Anchorage Slip given Settling Length equation looks like with Values.

Here is how the Anchorage Slip given Settling Length equation looks like with Units.

Here is how the Anchorage Slip given Settling Length equation looks like.

4.16 = 0.5 \cdot 10 \cdot \frac{41.6}{0.25 \cdot 200000}

4.16mm = 0.5 \cdot 10MPa \cdot \frac{41.6m}{0.25mm² \cdot 200000MPa}

4.16 = 0.5 \cdot 10 \cdot \frac{41.6}{0.25 \cdot 200000}

Tip: Use pencil ( Pencil

) icon above to edit Input Values and Units.

Calculate

Recalculate

Solution

Copy

Reset

You are here -

Home » Category

Engineering » Category

Civil » Category

Structural Engineering » fx Anchorage Slip given Settling Length

Anchorage Slip given Settling Length Solution

Follow our step by step solution on how to calculate Anchorage Slip given Settling Length?

FIRST Step Consider the formula

Δ = 0.5 \cdot Δf p \cdot \frac{l set}{A p \cdot E s}

Next Step Substitute values of Variables

∴

Δ = 0.5 \cdot 10MPa \cdot \frac{41.6m}{0.25mm² \cdot 200000MPa}

Next Step Convert Units

∴

Δ = 0.5 \cdot 10MPa \cdot \frac{41600mm}{0.25mm² \cdot 200000MPa}

Next Step Prepare to Evaluate

∴

Δ = 0.5 \cdot 10 \cdot \frac{41600}{0.25 \cdot 200000}

Next Step Evaluate

∴

Δ = 0.00416m

LAST Step Convert to Output's Unit

∴

Δ = 4.16mm

Anchorage Slip given Settling Length Formula Elements

Variables

Slip of Anchorage

Slip of Anchorage is the distance by which the anchorage gets slipped when the force is transmitted from anchorage to tendon.

Symbol: Δ

Measurement: LengthUnit: mm

Note: Value should be greater than 0.

Formulas to find Slip of Anchorage

Prestress Drop

Prestress Drop is the drop in applied prestress force due to strain in tendons.

Symbol: Δf_p

Measurement: PressureUnit: MPa

Note: Value should be greater than 0.

Formulas to find Prestress Drop

Settling Length

Settling Length is the length where the effect of anchorage friction is absent.

Symbol: l_set

Measurement: LengthUnit: m

Note: Value should be greater than 0.

Formulas to find Settling Length

Steel Area in Prestress

Steel Area in Prestress is the total cross sectional area of tendons.

Symbol: A_p

Measurement: AreaUnit: mm²

Note: Value should be greater than 0.

Formulas to find Steel Area in Prestress

Modulus of Elasticity of Steel Reinforcement

Modulus of Elasticity of Steel Reinforcement is a measure of its stiffness.

Symbol: E_s

Measurement: PressureUnit: MPa

Note: Value should be greater than 0.

Formulas to find Modulus of Elasticity of Steel Reinforcement

Other Formulas to find Slip of Anchorage

Go Slip of Anchorage

Δ = F \cdot \frac{PL Cable}{A Tendon \cdot E s}

Other formulas in Force Variation Diagram and Loss Due to Anchorage Slip category

Go Loss of Prestress due to Slip

F = A Tendon \cdot \frac{E s \cdot Δ}{PL Cable}

Go Prestressing Force at distance x when Reverse Friction is Considered

P x = (P - Δf p) \cdot \exp (η \cdot x)

Go Prestressing Force after Immediate Loss when Reverse Friction Effect is Considered

P = (\frac{P x}{\exp (η \cdot x)}) + Δf p

Go Pressure Drop given Setting Length

Δf p = 2 \cdot P \cdot η \cdot l set

How to Evaluate Anchorage Slip given Settling Length?

Anchorage Slip given Settling Length evaluator uses Slip of Anchorage = 0.5*Prestress Drop*Settling Length/(Steel Area in Prestress*Modulus of Elasticity of Steel Reinforcement) to evaluate the Slip of Anchorage, The Anchorage Slip given Settling Length is defined as the distance a ship moves backward while its anchor settles to secure it, measured from the anchor's touchdown point. Slip of Anchorage is denoted by Δ symbol.

How to evaluate Anchorage Slip given Settling Length using this online evaluator? To use this online evaluator for Anchorage Slip given Settling Length, enter Prestress Drop (Δf_p), Settling Length (l_set), Steel Area in Prestress (A_p) & Modulus of Elasticity of Steel Reinforcement (E_s) and hit the calculate button.

FAQs on Anchorage Slip given Settling Length

What is the formula to find Anchorage Slip given Settling Length?

The formula of Anchorage Slip given Settling Length is expressed as Slip of Anchorage = 0.5*Prestress Drop*Settling Length/(Steel Area in Prestress*Modulus of Elasticity of Steel Reinforcement). Here is an example- 5000 = 0.5*10000000*41.6/(2.5E-07*200000000000).

How to calculate Anchorage Slip given Settling Length?

With Prestress Drop (Δf_p), Settling Length (l_set), Steel Area in Prestress (A_p) & Modulus of Elasticity of Steel Reinforcement (E_s) we can find Anchorage Slip given Settling Length using the formula - Slip of Anchorage = 0.5*Prestress Drop*Settling Length/(Steel Area in Prestress*Modulus of Elasticity of Steel Reinforcement).

What are the other ways to Calculate Slip of Anchorage?

Here are the different ways to Calculate Slip of Anchorage-

Slip of Anchorage=Prestressing Force*Cable Length/(Tendon Area*Modulus of Elasticity of Steel Reinforcement)

Can the Anchorage Slip given Settling Length be negative?

No, the Anchorage Slip given Settling Length, measured in Length cannot be negative.

Which unit is used to measure Anchorage Slip given Settling Length?

Anchorage Slip given Settling Length is usually measured using the Millimeter[mm] for Length. Meter[mm], Kilometer[mm], Decimeter[mm] are the few other units in which Anchorage Slip given Settling Length can be measured.

Let Others Know

✖

Facebook

Twitter

Copied!

Anchorage Slip given Settling Length Formula

​GoSlip of Anchorage Formula

Anchorage Slip given Settling Length Example

Anchorage Slip given Settling Length Solution

Anchorage Slip given Settling Length Formula Elements

Other Formulas to find Slip of Anchorage

Other formulas in Force Variation Diagram and Loss Due to Anchorage Slip category

How to Evaluate Anchorage Slip given Settling Length?

FAQs on Anchorage Slip given Settling Length

Variable Name

GoSlip of Anchorage Formula