FormulaDen.com

Physics Chemistry Math Chemical Engineering Civil Electrical Electronics Electronics and Instrumentation Materials Science Mechanical Production Engineering Financial Health

Allowable Tensile Stress given Tensile Strength of Double Fillet Lap Formula

GoTensile Stress given Tensile Force for Butt Weld Joint Formula

GoTensile Stress given Tensile Force and Length of Weld Formula

Fx Copy

LaTeX Copy

Tensile Stress can be defined as the magnitude of force applied along the weld, which is divided by the cross-sectional area of the weld in a direction perpendicular to the applied force. Check FAQs

σ t = \frac{TS}{1.414 \cdot l \cdot t plate}

σ_t - Tensile Stress?TS - Tensile Strength?l - Length of Weld?t_plate - Thickness of Plate?

Allowable Tensile Stress given Tensile Strength of Double Fillet Lap Example

With values

With units

Only example

Here is how the Allowable Tensile Stress given Tensile Strength of Double Fillet Lap equation looks like with Values.

Here is how the Allowable Tensile Stress given Tensile Strength of Double Fillet Lap equation looks like with Units.

Here is how the Allowable Tensile Stress given Tensile Strength of Double Fillet Lap equation looks like.

257838.2838 = \frac{35}{1.414 \cdot 8 \cdot 12}

257838.2838MPa = \frac{35MPa}{1.414 \cdot 8mm \cdot 12mm}

257838.2838 = \frac{35}{1.414 \cdot 8 \cdot 12}

Tip: Use pencil ( Pencil

) icon above to edit Input Values and Units.

Calculate

Recalculate

Solution

Copy

Reset

You are here -

Home » Category

Physics » Category

Mechanical » Category

Strength of Materials » fx Allowable Tensile Stress given Tensile Strength of Double Fillet Lap

Allowable Tensile Stress given Tensile Strength of Double Fillet Lap Solution

Follow our step by step solution on how to calculate Allowable Tensile Stress given Tensile Strength of Double Fillet Lap?

FIRST Step Consider the formula

σ t = \frac{TS}{1.414 \cdot l \cdot t plate}

Next Step Substitute values of Variables

∴

σ t = \frac{35MPa}{1.414 \cdot 8mm \cdot 12mm}

Next Step Convert Units

∴

σ t = \frac{3.5E+7Pa}{1.414 \cdot 0.008m \cdot 0.012m}

Next Step Prepare to Evaluate

∴

σ t = \frac{3.5E+7}{1.414 \cdot 0.008 \cdot 0.012}

Next Step Evaluate

∴

σ t = 257838283828.383Pa

Next Step Convert to Output's Unit

∴

σ t = 257838.283828383MPa

LAST Step Rounding Answer

∴

σ t = 257838.2838MPa

Allowable Tensile Stress given Tensile Strength of Double Fillet Lap Formula Elements

Variables

Tensile Stress

Tensile Stress can be defined as the magnitude of force applied along the weld, which is divided by the cross-sectional area of the weld in a direction perpendicular to the applied force.

Symbol: σ_t

Measurement: PressureUnit: MPa

Note: Value should be greater than 0.

Formulas to find Tensile Stress

Tensile Strength

Tensile strength is the stress at the maximum on the engineering stress-strain curve.

Symbol: TS

Measurement: PressureUnit: MPa

Note: Value can be positive or negative.

Formulas to find Tensile Strength

Length of Weld

The Length of Weld is the linear distance of each weld segment.

Symbol: l

Measurement: LengthUnit: mm

Note: Value can be positive or negative.

Formulas to find Length of Weld

Thickness of Plate

The thickness of plate is the state or quality of being thick. The measure of the smallest dimension of a solid figure: a board of two-inch thickness.

Symbol: t_plate

Measurement: LengthUnit: mm

Note: Value should be greater than 0.

Formulas to find Thickness of Plate

Other Formulas to find Tensile Stress

Go Tensile Stress given Tensile Force for Butt Weld Joint

σ t = \frac{F tensile}{A weld bed}

Go Tensile Stress given Tensile Force and Length of Weld

σ t = \frac{F tensile}{l \cdot t}

Go Allowable Tensile Stress given Tensile Strength for Single Fillet Lap Joint

σ t = \frac{TS}{0.707 \cdot l \cdot t plate}

Go Tensile Stress given Tensile Strength of Double Fillet Lap and Area of Double Fillet Weld

σ t = \frac{TS}{A double}

Other formulas in Stresses in Weld category

Go Tensile Force for Butt Weld Joint

F tensile = σ t \cdot A weld bed

Go Area of Weld given Tensile Force for Butt Weld Joint

A weld bed = \frac{F tensile}{σ t}

Go Tensile Force for Butt Weld Joint given Length of Weld

F tensile = σ t \cdot l \cdot t

Go Depth of Weld given Tensile Force for Butt Weld Joint

t = \frac{F tensile}{σ t \cdot l}

How to Evaluate Allowable Tensile Stress given Tensile Strength of Double Fillet Lap?

Allowable Tensile Stress given Tensile Strength of Double Fillet Lap evaluator uses Tensile Stress = Tensile Strength/(1.414*Length of Weld*Thickness of Plate) to evaluate the Tensile Stress, Allowable tensile stress given tensile strength of double fillet lap is defined as the magnitude of force applied along an elastic rod, which is divided by the cross-sectional area of the rod in a direction perpendicular to the applied force. Tensile Stress is denoted by σ_t symbol.

How to evaluate Allowable Tensile Stress given Tensile Strength of Double Fillet Lap using this online evaluator? To use this online evaluator for Allowable Tensile Stress given Tensile Strength of Double Fillet Lap, enter Tensile Strength (TS), Length of Weld (l) & Thickness of Plate (t_plate) and hit the calculate button.

FAQs on Allowable Tensile Stress given Tensile Strength of Double Fillet Lap

What is the formula to find Allowable Tensile Stress given Tensile Strength of Double Fillet Lap?

The formula of Allowable Tensile Stress given Tensile Strength of Double Fillet Lap is expressed as Tensile Stress = Tensile Strength/(1.414*Length of Weld*Thickness of Plate). Here is an example- 0.257838 = 35000000/(1.414*0.008*0.012).

How to calculate Allowable Tensile Stress given Tensile Strength of Double Fillet Lap?

With Tensile Strength (TS), Length of Weld (l) & Thickness of Plate (t_plate) we can find Allowable Tensile Stress given Tensile Strength of Double Fillet Lap using the formula - Tensile Stress = Tensile Strength/(1.414*Length of Weld*Thickness of Plate).

What are the other ways to Calculate Tensile Stress?

Here are the different ways to Calculate Tensile Stress-

Tensile Stress=Tensile Force in Butt Weld/Weld Bed Area
Tensile Stress=Tensile Force in Butt Weld/(Length of Weld*Depth of Weld)
Tensile Stress=Tensile Strength/(0.707*Length of Weld*Thickness of Plate)

Can the Allowable Tensile Stress given Tensile Strength of Double Fillet Lap be negative?

No, the Allowable Tensile Stress given Tensile Strength of Double Fillet Lap, measured in Pressure cannot be negative.

Which unit is used to measure Allowable Tensile Stress given Tensile Strength of Double Fillet Lap?

Allowable Tensile Stress given Tensile Strength of Double Fillet Lap is usually measured using the Megapascal[MPa] for Pressure. Pascal[MPa], Kilopascal[MPa], Bar[MPa] are the few other units in which Allowable Tensile Stress given Tensile Strength of Double Fillet Lap can be measured.

Let Others Know

✖

Facebook

Twitter

Copied!