FormulaDen.com

Physics Chemistry Math Chemical Engineering Civil Electrical Electronics Electronics and Instrumentation Materials Science Mechanical Production Engineering Financial Health

Allowable Tensile Stress given Load Carried by Single Fillet Lap Weld Formula

GoAllowable Tensile Stress given Total Load Carried by Plates in Compound Weld Formula

Fx Copy

LaTeX Copy

Tensile Stress can be defined as the magnitude of force applied along the weld, which is divided by the cross-sectional area of the weld in a direction perpendicular to the applied force. Check FAQs

σ t = \frac{W}{0.707 \cdot L single \cdot t plate}

σ_t - Tensile Stress?W - Load on weld?L_single - Length of Single Fillet Lap Weld?t_plate - Thickness of Plate?

Allowable Tensile Stress given Load Carried by Single Fillet Lap Weld Example

With values

With units

Only example

Here is how the Allowable Tensile Stress given Load Carried by Single Fillet Lap Weld equation looks like with Values.

Here is how the Allowable Tensile Stress given Load Carried by Single Fillet Lap Weld equation looks like with Units.

Here is how the Allowable Tensile Stress given Load Carried by Single Fillet Lap Weld equation looks like.

707.2136 = \frac{9}{0.707 \cdot 1.5 \cdot 12}

707.2136MPa = \frac{9kN}{0.707 \cdot 1.5mm \cdot 12mm}

707.2136 = \frac{9}{0.707 \cdot 1.5 \cdot 12}

Tip: Use pencil ( Pencil

) icon above to edit Input Values and Units.

Calculate

Recalculate

Solution

Copy

Reset

You are here -

Home » Category

Physics » Category

Mechanical » Category

Strength of Materials » fx Allowable Tensile Stress given Load Carried by Single Fillet Lap Weld

Allowable Tensile Stress given Load Carried by Single Fillet Lap Weld Solution

Follow our step by step solution on how to calculate Allowable Tensile Stress given Load Carried by Single Fillet Lap Weld?

FIRST Step Consider the formula

σ t = \frac{W}{0.707 \cdot L single \cdot t plate}

Next Step Substitute values of Variables

∴

σ t = \frac{9kN}{0.707 \cdot 1.5mm \cdot 12mm}

Next Step Convert Units

∴

σ t = \frac{9000N}{0.707 \cdot 0.0015m \cdot 0.012m}

Next Step Prepare to Evaluate

∴

σ t = \frac{9000}{0.707 \cdot 0.0015 \cdot 0.012}

Next Step Evaluate

∴

σ t = 707213578.500707Pa

Next Step Convert to Output's Unit

∴

σ t = 707.213578500707MPa

LAST Step Rounding Answer

∴

σ t = 707.2136MPa

Allowable Tensile Stress given Load Carried by Single Fillet Lap Weld Formula Elements

Variables

Tensile Stress

Tensile Stress can be defined as the magnitude of force applied along the weld, which is divided by the cross-sectional area of the weld in a direction perpendicular to the applied force.

Symbol: σ_t

Measurement: PressureUnit: MPa

Note: Value should be greater than 0.

Formulas to find Tensile Stress

Load on weld

Load on weld is the instantaneous load applied perpendicular to the specimen cross section.

Symbol: W

Measurement: ForceUnit: kN

Note: Value should be greater than 0.

Formulas to find Load on weld

Length of Single Fillet Lap Weld

The Length of Single Fillet Lap Weld is the distance between two consecutive ends of welds.

Symbol: L_single

Measurement: LengthUnit: mm

Note: Value should be greater than 0.

Formulas to find Length of Single Fillet Lap Weld

Thickness of Plate

The thickness of plate is the state or quality of being thick. The measure of the smallest dimension of a solid figure: a board of two-inch thickness.

Symbol: t_plate

Measurement: LengthUnit: mm

Note: Value should be greater than 0.

Formulas to find Thickness of Plate

Other Formulas to find Tensile Stress

Go Allowable Tensile Stress given Total Load Carried by Plates in Compound Weld

σ t = \frac{W - 1.414 \cdot 𝜏 \cdot L parallel \cdot t plate}{0.707 \cdot L single \cdot t plate}

Other formulas in Analysis of Compound Weld category

Go Load Carried by Single Fillet Lap Weld

W = 0.707 \cdot σ t \cdot L single \cdot t plate

Go Length of Single Fillet Lap Weld given Load Carried by Single Fillet Lap Weld

L single = \frac{W}{0.707 \cdot σ t \cdot t plate}

Go Thickness of Plates given Load Carried by Single Fillet Lap Weld

t plate = \frac{W}{0.707 \cdot σ t \cdot L single}

Go Load Carried by Parallel Fillet Weld

W = 1.414 \cdot 𝜏 \cdot L parallel \cdot t plate

How to Evaluate Allowable Tensile Stress given Load Carried by Single Fillet Lap Weld?

Allowable Tensile Stress given Load Carried by Single Fillet Lap Weld evaluator uses Tensile Stress = Load on weld/(0.707*Length of Single Fillet Lap Weld*Thickness of Plate) to evaluate the Tensile Stress, Allowable tensile stress given load carried by single fillet lap weld is defined as the magnitude of force applied along an elastic rod, which is divided by the cross-sectional area of the rod in a direction perpendicular to the applied force. Tensile Stress is denoted by σ_t symbol.

How to evaluate Allowable Tensile Stress given Load Carried by Single Fillet Lap Weld using this online evaluator? To use this online evaluator for Allowable Tensile Stress given Load Carried by Single Fillet Lap Weld, enter Load on weld (W), Length of Single Fillet Lap Weld (L_single) & Thickness of Plate (t_plate) and hit the calculate button.

FAQs on Allowable Tensile Stress given Load Carried by Single Fillet Lap Weld

What is the formula to find Allowable Tensile Stress given Load Carried by Single Fillet Lap Weld?

The formula of Allowable Tensile Stress given Load Carried by Single Fillet Lap Weld is expressed as Tensile Stress = Load on weld/(0.707*Length of Single Fillet Lap Weld*Thickness of Plate). Here is an example- 0.000283 = 9000/(0.707*0.0015*0.012).

How to calculate Allowable Tensile Stress given Load Carried by Single Fillet Lap Weld?

With Load on weld (W), Length of Single Fillet Lap Weld (L_single) & Thickness of Plate (t_plate) we can find Allowable Tensile Stress given Load Carried by Single Fillet Lap Weld using the formula - Tensile Stress = Load on weld/(0.707*Length of Single Fillet Lap Weld*Thickness of Plate).

What are the other ways to Calculate Tensile Stress?

Here are the different ways to Calculate Tensile Stress-

Tensile Stress=(Load on weld-1.414*Shear Stress*Length of Parallel Fillet Weld*Thickness of Plate)/(0.707*Length of Single Fillet Lap Weld*Thickness of Plate)

Can the Allowable Tensile Stress given Load Carried by Single Fillet Lap Weld be negative?

No, the Allowable Tensile Stress given Load Carried by Single Fillet Lap Weld, measured in Pressure cannot be negative.

Which unit is used to measure Allowable Tensile Stress given Load Carried by Single Fillet Lap Weld?

Allowable Tensile Stress given Load Carried by Single Fillet Lap Weld is usually measured using the Megapascal[MPa] for Pressure. Pascal[MPa], Kilopascal[MPa], Bar[MPa] are the few other units in which Allowable Tensile Stress given Load Carried by Single Fillet Lap Weld can be measured.

Let Others Know

✖

Facebook

Twitter

Copied!

Allowable Tensile Stress given Load Carried by Single Fillet Lap Weld Formula

​GoAllowable Tensile Stress given Total Load Carried by Plates in Compound Weld Formula

Allowable Tensile Stress given Load Carried by Single Fillet Lap Weld Example

Allowable Tensile Stress given Load Carried by Single Fillet Lap Weld Solution

Allowable Tensile Stress given Load Carried by Single Fillet Lap Weld Formula Elements

Other Formulas to find Tensile Stress

Other formulas in Analysis of Compound Weld category

How to Evaluate Allowable Tensile Stress given Load Carried by Single Fillet Lap Weld?

FAQs on Allowable Tensile Stress given Load Carried by Single Fillet Lap Weld

Variable Name

GoAllowable Tensile Stress given Total Load Carried by Plates in Compound Weld Formula