FormulaDen.com

Physics Chemistry Math Chemical Engineering Civil Electrical Electronics Electronics and Instrumentation Materials Science Mechanical Production Engineering Financial Health

Allowable Stress for Expansion Rollers and Rockers where Diameter is up to 635 mm Formula

GoAllowable Stress for Expansion Rollers and Rockers where Diameter is from 635 mm to 3175 mm Formula

Fx Copy

LaTeX Copy

The allowable stress for expansion rollers or rockers used in bridges depends on the yield point in tension. Check FAQs

p = (\frac{f y - 13}{20}) \cdot 0.6 \cdot d

p - Allowable Stress?f_y - Yield Strength of Steel?d - Diameter of Roller or Rocker?

Allowable Stress for Expansion Rollers and Rockers where Diameter is up to 635 mm Example

With values

With units

Only example

Here is how the Allowable Stress for Expansion Rollers and Rockers where Diameter is up to 635 mm equation looks like with Values.

Here is how the Allowable Stress for Expansion Rollers and Rockers where Diameter is up to 635 mm equation looks like with Units.

Here is how the Allowable Stress for Expansion Rollers and Rockers where Diameter is up to 635 mm equation looks like.

4514.85 = (\frac{250 - 13}{20}) \cdot 0.6 \cdot 635

4514.85kN/mm = (\frac{250MPa - 13}{20}) \cdot 0.6 \cdot 635mm

4514.85 = (\frac{250 - 13}{20}) \cdot 0.6 \cdot 635

Tip: Use pencil ( Pencil

) icon above to edit Input Values and Units.

Calculate

Recalculate

Solution

Copy

Reset

You are here -

Home » Category

Engineering » Category

Civil » Category

Bridge and Suspension Cable » fx Allowable Stress for Expansion Rollers and Rockers where Diameter is up to 635 mm

Allowable Stress for Expansion Rollers and Rockers where Diameter is up to 635 mm Solution

Follow our step by step solution on how to calculate Allowable Stress for Expansion Rollers and Rockers where Diameter is up to 635 mm?

FIRST Step Consider the formula

p = (\frac{f y - 13}{20}) \cdot 0.6 \cdot d

Next Step Substitute values of Variables

∴

p = (\frac{250MPa - 13}{20}) \cdot 0.6 \cdot 635mm

Next Step Prepare to Evaluate

∴

p = (\frac{250 - 13}{20}) \cdot 0.6 \cdot 635

Next Step Evaluate

∴

p = 4514850000N/m

LAST Step Convert to Output's Unit

∴

p = 4514.85kN/mm

Allowable Stress for Expansion Rollers and Rockers where Diameter is up to 635 mm Formula Elements

Variables

Allowable Stress

The allowable stress for expansion rollers or rockers used in bridges depends on the yield point in tension.

Symbol: p

Measurement: Shear RangeUnit: kN/mm

Note: Value should be greater than 0.

Formulas to find Allowable Stress

Yield Strength of Steel

Yield strength of steel is the level of stress that corresponds to the yield point.

Symbol: f_y

Measurement: StressUnit: MPa

Note: Value should be greater than 0.

Formulas to find Yield Strength of Steel

Diameter of Roller or Rocker

The diameter of roller or rocker is the length of the line which touches the two points on the circle which ae used in bridges.

Symbol: d

Measurement: LengthUnit: mm

Note: Value should be greater than 0.

Formulas to find Diameter of Roller or Rocker

Other Formulas to find Allowable Stress

Go Allowable Stress for Expansion Rollers and Rockers where Diameter is from 635 mm to 3175 mm

p = (\frac{f y - 13}{20}) \cdot 3 \cdot \sqrt{d}

Other formulas in Bearing on Milled Surfaces and Bridge Fasteners category

Go Diameter of Roller or Rocker for d up to 635 mm

d = \frac{p}{(\frac{f y}{20}) \cdot 0.6}

Go Diameter of Roller or Rocker for d from 635 to 3125mm

d = {(\frac{p}{(\frac{f y - 13}{20}) \cdot 3})}^{2}

Go Allowable Bearing Stress for High Strength Bolts

F p = 1.35 \cdot F u

Go Tensile Strength of Connected Part given Allowable Bearing Stress for High Strength Bolts

F u = \frac{F p}{1.35}

How to Evaluate Allowable Stress for Expansion Rollers and Rockers where Diameter is up to 635 mm?

Allowable Stress for Expansion Rollers and Rockers where Diameter is up to 635 mm evaluator uses Allowable Stress = ((Yield Strength of Steel-13)/20)*0.6*Diameter of Roller or Rocker to evaluate the Allowable Stress, The Allowable Stress for Expansion Rollers and Rockers where Diameter is up to 635 mm formula is defined as the maximum working stress designated on a member for use. Allowable Stress is denoted by p symbol.

How to evaluate Allowable Stress for Expansion Rollers and Rockers where Diameter is up to 635 mm using this online evaluator? To use this online evaluator for Allowable Stress for Expansion Rollers and Rockers where Diameter is up to 635 mm, enter Yield Strength of Steel (f_y) & Diameter of Roller or Rocker (d) and hit the calculate button.

FAQs on Allowable Stress for Expansion Rollers and Rockers where Diameter is up to 635 mm

What is the formula to find Allowable Stress for Expansion Rollers and Rockers where Diameter is up to 635 mm?

The formula of Allowable Stress for Expansion Rollers and Rockers where Diameter is up to 635 mm is expressed as Allowable Stress = ((Yield Strength of Steel-13)/20)*0.6*Diameter of Roller or Rocker. Here is an example- 0.004515 = ((250000000-13)/20)*0.6*0.635.

How to calculate Allowable Stress for Expansion Rollers and Rockers where Diameter is up to 635 mm?

With Yield Strength of Steel (f_y) & Diameter of Roller or Rocker (d) we can find Allowable Stress for Expansion Rollers and Rockers where Diameter is up to 635 mm using the formula - Allowable Stress = ((Yield Strength of Steel-13)/20)*0.6*Diameter of Roller or Rocker.

What are the other ways to Calculate Allowable Stress?

Here are the different ways to Calculate Allowable Stress-

Allowable Stress=((Yield Strength of Steel-13)/20)*3*sqrt(Diameter of Roller or Rocker)

Can the Allowable Stress for Expansion Rollers and Rockers where Diameter is up to 635 mm be negative?

No, the Allowable Stress for Expansion Rollers and Rockers where Diameter is up to 635 mm, measured in Shear Range cannot be negative.

Which unit is used to measure Allowable Stress for Expansion Rollers and Rockers where Diameter is up to 635 mm?

Allowable Stress for Expansion Rollers and Rockers where Diameter is up to 635 mm is usually measured using the Kilonewton per Millimeter[kN/mm] for Shear Range. Newton per Meter[kN/mm] are the few other units in which Allowable Stress for Expansion Rollers and Rockers where Diameter is up to 635 mm can be measured.

Let Others Know

✖

Facebook

Twitter

Copied!

Allowable Stress for Expansion Rollers and Rockers where Diameter is up to 635 mm Formula

​GoAllowable Stress for Expansion Rollers and Rockers where Diameter is from 635 mm to 3175 mm Formula

Allowable Stress for Expansion Rollers and Rockers where Diameter is up to 635 mm Example

Allowable Stress for Expansion Rollers and Rockers where Diameter is up to 635 mm Solution

Allowable Stress for Expansion Rollers and Rockers where Diameter is up to 635 mm Formula Elements

Other Formulas to find Allowable Stress

Other formulas in Bearing on Milled Surfaces and Bridge Fasteners category

How to Evaluate Allowable Stress for Expansion Rollers and Rockers where Diameter is up to 635 mm?

FAQs on Allowable Stress for Expansion Rollers and Rockers where Diameter is up to 635 mm

Variable Name

GoAllowable Stress for Expansion Rollers and Rockers where Diameter is from 635 mm to 3175 mm Formula