FormulaDen.com

Physics Chemistry Math Chemical Engineering Civil Electrical Electronics Electronics and Instrumentation Materials Science Mechanical Production Engineering Financial Health

Allowable Compressive Stress Parallel to Grain for Intermediate Columns Formula

GoAllowable Compressive Stress Parallel to Grain for Long Columns Formula

GoAllowable Compressive Stress in Rectangular Section Formula

Fx Copy

LaTeX Copy

Allowable compressive stress in given column either long column, short column or intermediate column parallel to the grain. Check FAQs

f = f c \cdot (1 - (\frac{1}{3}) \cdot {(\frac{\frac{L Unbraced}{d}}{k col})}^{4})

f - Allowable Compressive Stress in Given Column?f_c - Allowable Compressive Stress in Short Column?L_Unbraced - Unbraced Length of Member?d - Least Dimension?k_col - Value of k for Columns?

Allowable Compressive Stress Parallel to Grain for Intermediate Columns Example

With values

With units

Only example

Here is how the Allowable Compressive Stress Parallel to Grain for Intermediate Columns equation looks like with Values.

Here is how the Allowable Compressive Stress Parallel to Grain for Intermediate Columns equation looks like with Units.

Here is how the Allowable Compressive Stress Parallel to Grain for Intermediate Columns equation looks like.

0.5992 = 0.6 \cdot (1 - (\frac{1}{3}) \cdot {(\frac{\frac{1000}{200}}{20})}^{4})

0.5992MPa = 0.6MPa \cdot (1 - (\frac{1}{3}) \cdot {(\frac{\frac{1000mm}{200mm}}{20})}^{4})

0.5992 = 0.6 \cdot (1 - (\frac{1}{3}) \cdot {(\frac{\frac{1000}{200}}{20})}^{4})

Tip: Use pencil ( Pencil

) icon above to edit Input Values and Units.

Calculate

Recalculate

Solution

Copy

Reset

You are here -

Home » Category

Engineering » Category

Civil » Category

Timber Engineering » fx Allowable Compressive Stress Parallel to Grain for Intermediate Columns

Allowable Compressive Stress Parallel to Grain for Intermediate Columns Solution

Follow our step by step solution on how to calculate Allowable Compressive Stress Parallel to Grain for Intermediate Columns?

FIRST Step Consider the formula

f = f c \cdot (1 - (\frac{1}{3}) \cdot {(\frac{\frac{L Unbraced}{d}}{k col})}^{4})

Next Step Substitute values of Variables

∴

f = 0.6MPa \cdot (1 - (\frac{1}{3}) \cdot {(\frac{\frac{1000mm}{200mm}}{20})}^{4})

Next Step Convert Units

∴

f = 600000Pa \cdot (1 - (\frac{1}{3}) \cdot {(\frac{\frac{1m}{0.2m}}{20})}^{4})

Next Step Prepare to Evaluate

∴

f = 600000 \cdot (1 - (\frac{1}{3}) \cdot {(\frac{\frac{1}{0.2}}{20})}^{4})

Next Step Evaluate

∴

f = 599218.75Pa

Next Step Convert to Output's Unit

∴

f = 0.59921875MPa

LAST Step Rounding Answer

∴

f = 0.5992MPa

Allowable Compressive Stress Parallel to Grain for Intermediate Columns Formula Elements

Variables

Allowable Compressive Stress in Given Column

Allowable compressive stress in given column either long column, short column or intermediate column parallel to the grain.

Symbol: f

Measurement: StressUnit: MPa

Note: Value should be greater than 0.

Formulas to find Allowable Compressive Stress in Given Column

Allowable Compressive Stress in Short Column

Allowable compressive stress in short column parallel to the grain.

Symbol: f_c

Measurement: StressUnit: MPa

Note: Value should be greater than 0.

Formulas to find Allowable Compressive Stress in Short Column

Unbraced Length of Member

Unbraced length of member is defined as the distance between adjacent Points.

Symbol: L_Unbraced

Measurement: LengthUnit: mm

Note: Value should be greater than 0.

Formulas to find Unbraced Length of Member

Least Dimension

Least Dimension is the measure of the shortest side of the column.

Symbol: d

Measurement: LengthUnit: mm

Note: Value should be greater than 0.

Formulas to find Least Dimension

Value of k for Columns

Value of k for Columns is the factor used to mention the neutral axis depth.

Symbol: k_col

Measurement: NAUnit: Unitless

Note: Value should be greater than 0.

Formulas to find Value of k for Columns

Other Formulas to find Allowable Compressive Stress in Given Column

Go Allowable Compressive Stress Parallel to Grain for Long Columns

f = \frac{0.274 \cdot E}{{(\frac{L Unbraced}{d})}^{2}}

Go Allowable Compressive Stress in Rectangular Section

f = \frac{0.3 \cdot E}{{(\frac{L Unbraced}{d})}^{2}}

Other formulas in Forest Products Laboratory Recommendations category

Go Elasticity Modulus for Allowable Compressive Stress in Rectangular Section

E = \frac{f \cdot {(\frac{L Unbraced}{d})}^{2}}{0.3}

How to Evaluate Allowable Compressive Stress Parallel to Grain for Intermediate Columns?

Allowable Compressive Stress Parallel to Grain for Intermediate Columns evaluator uses Allowable Compressive Stress in Given Column = Allowable Compressive Stress in Short Column*(1-(1/3)*((Unbraced Length of Member/Least Dimension)/Value of k for Columns)^4) to evaluate the Allowable Compressive Stress in Given Column, The Allowable Compressive Stress Parallel to Grain for Intermediate Columns formula is defined as it calculates the maximum stress allowed for compression for intermediate columns which acts parallel to the grain. Allowable Compressive Stress in Given Column is denoted by f symbol.

How to evaluate Allowable Compressive Stress Parallel to Grain for Intermediate Columns using this online evaluator? To use this online evaluator for Allowable Compressive Stress Parallel to Grain for Intermediate Columns, enter Allowable Compressive Stress in Short Column (f_c), Unbraced Length of Member (L_Unbraced), Least Dimension (d) & Value of k for Columns (k_col) and hit the calculate button.

FAQs on Allowable Compressive Stress Parallel to Grain for Intermediate Columns

What is the formula to find Allowable Compressive Stress Parallel to Grain for Intermediate Columns?

The formula of Allowable Compressive Stress Parallel to Grain for Intermediate Columns is expressed as Allowable Compressive Stress in Given Column = Allowable Compressive Stress in Short Column*(1-(1/3)*((Unbraced Length of Member/Least Dimension)/Value of k for Columns)^4). Here is an example- 6E-7 = 600000*(1-(1/3)*((1/0.2)/20)^4).

How to calculate Allowable Compressive Stress Parallel to Grain for Intermediate Columns?

With Allowable Compressive Stress in Short Column (f_c), Unbraced Length of Member (L_Unbraced), Least Dimension (d) & Value of k for Columns (k_col) we can find Allowable Compressive Stress Parallel to Grain for Intermediate Columns using the formula - Allowable Compressive Stress in Given Column = Allowable Compressive Stress in Short Column*(1-(1/3)*((Unbraced Length of Member/Least Dimension)/Value of k for Columns)^4).

What are the other ways to Calculate Allowable Compressive Stress in Given Column?

Here are the different ways to Calculate Allowable Compressive Stress in Given Column-

Allowable Compressive Stress in Given Column=(0.274*Modulus of Elasticity)/(Unbraced Length of Member/Least Dimension)^2
Allowable Compressive Stress in Given Column=(0.3*Modulus of Elasticity)/(Unbraced Length of Member/Least Dimension)^2

Can the Allowable Compressive Stress Parallel to Grain for Intermediate Columns be negative?

No, the Allowable Compressive Stress Parallel to Grain for Intermediate Columns, measured in Stress cannot be negative.

Which unit is used to measure Allowable Compressive Stress Parallel to Grain for Intermediate Columns?

Allowable Compressive Stress Parallel to Grain for Intermediate Columns is usually measured using the Megapascal[MPa] for Stress. Pascal[MPa], Newton per Square Meter[MPa], Newton per Square Millimeter[MPa] are the few other units in which Allowable Compressive Stress Parallel to Grain for Intermediate Columns can be measured.

Let Others Know

✖

Facebook

Twitter

Copied!

Allowable Compressive Stress Parallel to Grain for Intermediate Columns Formula

​GoAllowable Compressive Stress Parallel to Grain for Long Columns Formula

​GoAllowable Compressive Stress in Rectangular Section Formula

Allowable Compressive Stress Parallel to Grain for Intermediate Columns Example

Allowable Compressive Stress Parallel to Grain for Intermediate Columns Solution

Allowable Compressive Stress Parallel to Grain for Intermediate Columns Formula Elements

Other Formulas to find Allowable Compressive Stress in Given Column

Other formulas in Forest Products Laboratory Recommendations category

How to Evaluate Allowable Compressive Stress Parallel to Grain for Intermediate Columns?

FAQs on Allowable Compressive Stress Parallel to Grain for Intermediate Columns

Variable Name

GoAllowable Compressive Stress Parallel to Grain for Long Columns Formula

GoAllowable Compressive Stress in Rectangular Section Formula