FormulaDen.com

Physics Chemistry Math Chemical Engineering Civil Electrical Electronics Electronics and Instrumentation Materials Science Mechanical Production Engineering Financial Health

Allowable Bearing Stress on Projected Area of Fasteners Formula

Fx Copy

LaTeX Copy

Allowable Bearing Stress is the maximum bearing stress that can be applied to a material or a structural element without causing failure. Check FAQs

F p = 1.2 \cdot TS

F_p - Allowable Bearing Stress?TS - Tensile Strength MPA?

Allowable Bearing Stress on Projected Area of Fasteners Example

With values

With units

Only example

Here is how the Allowable Bearing Stress on Projected Area of Fasteners equation looks like with Values.

Here is how the Allowable Bearing Stress on Projected Area of Fasteners equation looks like with Units.

Here is how the Allowable Bearing Stress on Projected Area of Fasteners equation looks like.

9.84 = 1.2 \cdot 8.2

9.84MPa = 1.2 \cdot 8.2MPa

9.84 = 1.2 \cdot 8.2

Tip: Use pencil ( Pencil

) icon above to edit Input Values and Units.

Calculate

Recalculate

Solution

Copy

Reset

You are here -

Home » Category

Engineering » Category

Civil » Category

Design of Steel Structures » fx Allowable Bearing Stress on Projected Area of Fasteners

Allowable Bearing Stress on Projected Area of Fasteners Solution

Follow our step by step solution on how to calculate Allowable Bearing Stress on Projected Area of Fasteners?

FIRST Step Consider the formula

F p = 1.2 \cdot TS

Next Step Substitute values of Variables

∴

F p = 1.2 \cdot 8.2MPa

Next Step Prepare to Evaluate

∴

F p = 1.2 \cdot 8.2

Next Step Evaluate

∴

F p = 9840000Pa

LAST Step Convert to Output's Unit

∴

F p = 9.84MPa

Allowable Bearing Stress on Projected Area of Fasteners Formula Elements

Variables

Allowable Bearing Stress

Allowable Bearing Stress is the maximum bearing stress that can be applied to a material or a structural element without causing failure.

Symbol: F_p

Measurement: PressureUnit: MPa

Note: Value should be greater than 0.

Formulas to find Allowable Bearing Stress

Tensile Strength MPA

Tensile Strength MPA is the stress at the maximum on the engineering stress-strain curve in Megapascal.

Symbol: TS

Measurement: PressureUnit: MPa

Note: Value should be greater than 0.

Formulas to find Tensile Strength MPA

Other formulas in Design of Stiffeners under Loads category

Go Column-Web Depth Clear of Fillets

d c = \frac{4100 \cdot {t wc}^{3} \cdot \sqrt{F yc}}{P bf}

Go Thickness of Column Web given Column Web Depth Clear of Fillets

t wc = {(\frac{d c \cdot P bf}{4100 \cdot \sqrt{F yc}})}^{\frac{1}{3}}

Go Computed Force for Column-Web Depth of Fillets

P bf = \frac{4100 \cdot {t wc}^{3} \cdot \sqrt{F yc}}{d c}

Go Cross sectional area of Column Web Stiffeners

A cs = \frac{P bf - F yc \cdot t wc \cdot (t f + 5 \cdot K)}{F yst}

How to Evaluate Allowable Bearing Stress on Projected Area of Fasteners?

Allowable Bearing Stress on Projected Area of Fasteners evaluator uses Allowable Bearing Stress = 1.2*Tensile Strength MPA to evaluate the Allowable Bearing Stress, The Allowable Bearing Stress on Projected Area of Fasteners formula is defined as the maximum load that the footing can support without failure with appropriate factors of safety. Allowable Bearing Stress is denoted by F_p symbol.

How to evaluate Allowable Bearing Stress on Projected Area of Fasteners using this online evaluator? To use this online evaluator for Allowable Bearing Stress on Projected Area of Fasteners, enter Tensile Strength MPA (TS) and hit the calculate button.

FAQs on Allowable Bearing Stress on Projected Area of Fasteners

What is the formula to find Allowable Bearing Stress on Projected Area of Fasteners?

The formula of Allowable Bearing Stress on Projected Area of Fasteners is expressed as Allowable Bearing Stress = 1.2*Tensile Strength MPA. Here is an example- 9.8E-6 = 1.2*8200000.

How to calculate Allowable Bearing Stress on Projected Area of Fasteners?

With Tensile Strength MPA (TS) we can find Allowable Bearing Stress on Projected Area of Fasteners using the formula - Allowable Bearing Stress = 1.2*Tensile Strength MPA.

Can the Allowable Bearing Stress on Projected Area of Fasteners be negative?

No, the Allowable Bearing Stress on Projected Area of Fasteners, measured in Pressure cannot be negative.

Which unit is used to measure Allowable Bearing Stress on Projected Area of Fasteners?

Allowable Bearing Stress on Projected Area of Fasteners is usually measured using the Megapascal[MPa] for Pressure. Pascal[MPa], Kilopascal[MPa], Bar[MPa] are the few other units in which Allowable Bearing Stress on Projected Area of Fasteners can be measured.

Let Others Know

✖

Facebook

Twitter

Copied!