FormulaDen.com

Physics Chemistry Math Chemical Engineering Civil Electrical Electronics Electronics and Instrumentation Materials Science Mechanical Production Engineering Financial Health

Allowable Bearing Stress on Milled Stiffeners and other Steel Parts Formula

GoAllowable Bearing Stress for High Strength Bolts Formula

Fx Copy

LaTeX Copy

The allowable bearing stress is the maximum bearing stress that can be applied to the structure such that it is safe against instability due to shear failure. Check FAQs

F p = 0.80 \cdot F u

F_p - Allowable Bearing Stress?F_u - Tensile Strength of connected part?

Allowable Bearing Stress on Milled Stiffeners and other Steel Parts Example

With values

With units

Only example

Here is how the Allowable Bearing Stress on Milled Stiffeners and other Steel Parts equation looks like with Values.

Here is how the Allowable Bearing Stress on Milled Stiffeners and other Steel Parts equation looks like with Units.

Here is how the Allowable Bearing Stress on Milled Stiffeners and other Steel Parts equation looks like.

81.6 = 0.80 \cdot 102

81.6MPa = 0.80 \cdot 102MPa

81.6 = 0.80 \cdot 102

Tip: Use pencil ( Pencil

) icon above to edit Input Values and Units.

Calculate

Recalculate

Solution

Copy

Reset

You are here -

Home » Category

Engineering » Category

Civil » Category

Bridge and Suspension Cable » fx Allowable Bearing Stress on Milled Stiffeners and other Steel Parts

Allowable Bearing Stress on Milled Stiffeners and other Steel Parts Solution

Follow our step by step solution on how to calculate Allowable Bearing Stress on Milled Stiffeners and other Steel Parts?

FIRST Step Consider the formula

F p = 0.80 \cdot F u

Next Step Substitute values of Variables

∴

F p = 0.80 \cdot 102MPa

Next Step Prepare to Evaluate

∴

F p = 0.80 \cdot 102

Next Step Evaluate

∴

F p = 81600000Pa

LAST Step Convert to Output's Unit

∴

F p = 81.6MPa

Allowable Bearing Stress on Milled Stiffeners and other Steel Parts Formula Elements

Variables

Allowable Bearing Stress

The allowable bearing stress is the maximum bearing stress that can be applied to the structure such that it is safe against instability due to shear failure.

Symbol: F_p

Measurement: StressUnit: MPa

Note: Value can be positive or negative.

Formulas to find Allowable Bearing Stress

Tensile Strength of connected part

The tensile strength of connected part is the maximum stress that a material can bear before breaking when it is allowed to be stretched or pulled.

Symbol: F_u

Measurement: StressUnit: MPa

Note: Value can be positive or negative.

Formulas to find Tensile Strength of connected part

Other Formulas to find Allowable Bearing Stress

Go Allowable Bearing Stress for High Strength Bolts

F p = 1.35 \cdot F u

Other formulas in Bearing on Milled Surfaces and Bridge Fasteners category

Go Allowable Stress for Expansion Rollers and Rockers where Diameter is up to 635 mm

p = (\frac{f y - 13}{20}) \cdot 0.6 \cdot d

Go Allowable Stress for Expansion Rollers and Rockers where Diameter is from 635 mm to 3175 mm

p = (\frac{f y - 13}{20}) \cdot 3 \cdot \sqrt{d}

Go Diameter of Roller or Rocker for d up to 635 mm

d = \frac{p}{(\frac{f y}{20}) \cdot 0.6}

Go Diameter of Roller or Rocker for d from 635 to 3125mm

d = {(\frac{p}{(\frac{f y - 13}{20}) \cdot 3})}^{2}

How to Evaluate Allowable Bearing Stress on Milled Stiffeners and other Steel Parts?

Allowable Bearing Stress on Milled Stiffeners and other Steel Parts evaluator uses Allowable Bearing Stress = 0.80*Tensile Strength of connected part to evaluate the Allowable Bearing Stress, The Allowable Bearing Stress on Milled Stiffeners and other Steel Parts formula is defined as the maximum stress that a milled stiffener and other steel parts can bear before breaking when it is allowed to be stretched or pulled. Allowable Bearing Stress is denoted by F_p symbol.

How to evaluate Allowable Bearing Stress on Milled Stiffeners and other Steel Parts using this online evaluator? To use this online evaluator for Allowable Bearing Stress on Milled Stiffeners and other Steel Parts, enter Tensile Strength of connected part (F_u) and hit the calculate button.

FAQs on Allowable Bearing Stress on Milled Stiffeners and other Steel Parts

What is the formula to find Allowable Bearing Stress on Milled Stiffeners and other Steel Parts?

The formula of Allowable Bearing Stress on Milled Stiffeners and other Steel Parts is expressed as Allowable Bearing Stress = 0.80*Tensile Strength of connected part. Here is an example- 8.2E-5 = 0.80*102000000.

How to calculate Allowable Bearing Stress on Milled Stiffeners and other Steel Parts?

With Tensile Strength of connected part (F_u) we can find Allowable Bearing Stress on Milled Stiffeners and other Steel Parts using the formula - Allowable Bearing Stress = 0.80*Tensile Strength of connected part.

What are the other ways to Calculate Allowable Bearing Stress?

Here are the different ways to Calculate Allowable Bearing Stress-

Allowable Bearing Stress=1.35*Tensile Strength of connected part

Can the Allowable Bearing Stress on Milled Stiffeners and other Steel Parts be negative?

Yes, the Allowable Bearing Stress on Milled Stiffeners and other Steel Parts, measured in Stress can be negative.

Which unit is used to measure Allowable Bearing Stress on Milled Stiffeners and other Steel Parts?

Allowable Bearing Stress on Milled Stiffeners and other Steel Parts is usually measured using the Megapascal[MPa] for Stress. Pascal[MPa], Newton per Square Meter[MPa], Newton per Square Millimeter[MPa] are the few other units in which Allowable Bearing Stress on Milled Stiffeners and other Steel Parts can be measured.

Let Others Know

✖

Facebook

Twitter

Copied!