Absolute Volume of Component Formula

Fx Copy
LaTeX Copy
Absolute Volume is the total volume required for the four components - cements, gravel, sand, and water. Check FAQs
Va=WLSGρwater
Va - Absolute Volume?WL - Weight of Material?SG - Specific Gravity of Material?ρwater - Water Density?

Absolute Volume of Component Example

With values
With units
Only example

Here is how the Absolute Volume of Component equation looks like with Values.

Here is how the Absolute Volume of Component equation looks like with Units.

Here is how the Absolute Volume of Component equation looks like.

0.375Edit=900Edit2.4Edit1000.001Edit
You are here -
HomeIcon Home » Category Engineering » Category Civil » Category Concrete Formulas » fx Absolute Volume of Component

Absolute Volume of Component Solution

Follow our step by step solution on how to calculate Absolute Volume of Component?

FIRST Step Consider the formula
Va=WLSGρwater
Next Step Substitute values of Variables
Va=900kg2.41000.001kg/m³
Next Step Prepare to Evaluate
Va=9002.41000.001
Next Step Evaluate
Va=0.374999625000375
LAST Step Rounding Answer
Va=0.375

Absolute Volume of Component Formula Elements

Variables
Absolute Volume
Absolute Volume is the total volume required for the four components - cements, gravel, sand, and water.
Symbol: Va
Measurement: VolumeUnit:
Note: Value should be greater than 0.
Weight of Material
Weight of Material is the total weight of of the four components—cements, gravel, sand, and water used in a batch.
Symbol: WL
Measurement: WeightUnit: kg
Note: Value should be greater than 0.
Specific Gravity of Material
Specific Gravity of Material is a dimensionless unit defined as the ratio of the density of the material to the density of water at a specified temperature.
Symbol: SG
Measurement: NAUnit: Unitless
Note: Value should be greater than 0.
Water Density
Water Density is the mass of water per unit volume; it typically equals 1 g/cm³ at 4°C and varies with temperature and salinity.
Symbol: ρwater
Measurement: DensityUnit: kg/m³
Note: Value should be greater than 0.

Other formulas in Job Mix Concrete Volume category

​Go Weight of Cementitious Materials in Concrete Batch
wc=wmCW
​Go Water Cement Ratio
CW=wmwc
​Go Weight of Material given its Absolute Volume
WL=VaSGρwater
​Go Specific Gravity of Material given its Absolute Volume
SG=WLVaρwater

How to Evaluate Absolute Volume of Component?

Absolute Volume of Component evaluator uses Absolute Volume = Weight of Material/(Specific Gravity of Material*Water Density) to evaluate the Absolute Volume, The Absolute Volume of Component formula is defined as it calculates the absolute volume (Va) of the four components—cement, gravel, sand, and water. Absolute Volume is denoted by Va symbol.

How to evaluate Absolute Volume of Component using this online evaluator? To use this online evaluator for Absolute Volume of Component, enter Weight of Material (WL), Specific Gravity of Material (SG) & Water Density water) and hit the calculate button.

FAQs on Absolute Volume of Component

What is the formula to find Absolute Volume of Component?
The formula of Absolute Volume of Component is expressed as Absolute Volume = Weight of Material/(Specific Gravity of Material*Water Density). Here is an example- 0.375 = 900/(2.4*1000.001).
How to calculate Absolute Volume of Component?
With Weight of Material (WL), Specific Gravity of Material (SG) & Water Density water) we can find Absolute Volume of Component using the formula - Absolute Volume = Weight of Material/(Specific Gravity of Material*Water Density).
Can the Absolute Volume of Component be negative?
No, the Absolute Volume of Component, measured in Volume cannot be negative.
Which unit is used to measure Absolute Volume of Component?
Absolute Volume of Component is usually measured using the Cubic Meter[m³] for Volume. Cubic Centimeter[m³], Cubic Millimeter[m³], Liter[m³] are the few other units in which Absolute Volume of Component can be measured.
Copied!