FormulaDen.com

Physics Chemistry Math Chemical Engineering Civil Electrical Electronics Electronics and Instrumentation Materials Science Mechanical Production Engineering Financial Health

Absolute Viscosity Formula

Fx Copy

LaTeX Copy

Absolute Fluid Viscosity is a measure of a fluid's resistance to flow. It quantifies internal friction, affecting how smoothly fluid layers slide past one another under an applied force. Check FAQs

µ a = \frac{V \cdot D \cdot ρ}{R}

µ_a - Absolute Fluid Viscosity?V - Fluid Velocity?D - Pipe Diameter?ρ - Fluid Density?R - Reynolds Number?

Absolute Viscosity Example

With values

With units

Only example

Here is how the Absolute Viscosity equation looks like with Values.

Here is how the Absolute Viscosity equation looks like with Units.

Here is how the Absolute Viscosity equation looks like.

3 = \frac{300 \cdot 0.05 \cdot 1000}{5000}

3Pa*s = \frac{300m/s \cdot 0.05m \cdot 1000kg/m³}{5000}

3 = \frac{300 \cdot 0.05 \cdot 1000}{5000}

Tip: Use pencil ( Pencil

) icon above to edit Input Values and Units.

Calculate

Recalculate

Solution

Copy

Reset

You are here -

Home » Category

Engineering » Category

Electronics and Instrumentation » Category

Measurement of Physical Parameters » fx Absolute Viscosity

Absolute Viscosity Solution

Follow our step by step solution on how to calculate Absolute Viscosity?

FIRST Step Consider the formula

µ a = \frac{V \cdot D \cdot ρ}{R}

Next Step Substitute values of Variables

∴

µ a = \frac{300m/s \cdot 0.05m \cdot 1000kg/m³}{5000}

Next Step Prepare to Evaluate

∴

µ a = \frac{300 \cdot 0.05 \cdot 1000}{5000}

LAST Step Evaluate

∴

µ a = 3Pa*s

Absolute Viscosity Formula Elements

Variables

Absolute Fluid Viscosity

Absolute Fluid Viscosity is a measure of a fluid's resistance to flow. It quantifies internal friction, affecting how smoothly fluid layers slide past one another under an applied force.

Symbol: µ_a

Measurement: Dynamic ViscosityUnit: Pa*s

Note: Value should be greater than 0.

Formulas to find Absolute Fluid Viscosity

Fluid Velocity

Fluid Velocity is the speed and direction at which fluid particles move through a given point, influencing flow dynamics and rate, typically measured in meters per second (m/s).

Symbol: V

Measurement: SpeedUnit: m/s

Note: Value should be greater than 0.

Formulas to find Fluid Velocity

Pipe Diameter

Pipe Diameter is the width of a cylindrical conduit, crucial in fluid dynamics, influencing flow rate, pressure drop, and system design, typically measured in millimeters or inches.

Symbol: D

Measurement: LengthUnit: m

Note: Value should be greater than 0.

Formulas to find Pipe Diameter

Fluid Density

Fluid Density is the mass per unit volume of a fluid, influencing buoyancy, pressure, and flow behavior, typically measured in kilograms per cubic meter (kg/m³).

Symbol: ρ

Measurement: DensityUnit: kg/m³

Note: Value should be greater than 0.

Formulas to find Fluid Density

Reynolds Number

Reynolds Number is a dimensionless quantity used to predict fluid flow patterns and transition between laminar and turbulent flow regimes, determined by the ratio of inertial forces.

Symbol: R

Measurement: NAUnit: Unitless

Note: Value should be greater than 0.

Formulas to find Reynolds Number

Other formulas in Flow Measurement category

Go Reynolds number of fluid flowing in Pipe

R = \frac{V \cdot D \cdot ρ}{µ a}

Go Flow Rate

F v = A \cdot V avg

Go Mass Flow Rate

Q = ρ m \cdot F v

Go Volume Flow Rate

F v = \frac{Q}{ρ m}

How to Evaluate Absolute Viscosity?

Absolute Viscosity evaluator uses Absolute Fluid Viscosity = (Fluid Velocity*Pipe Diameter*Fluid Density)/Reynolds Number to evaluate the Absolute Fluid Viscosity, The Absolute Viscosity formula is defined as the force needed by a fluid to overcome its own internal molecular friction so that it can flow. Absolute Fluid Viscosity is denoted by µ_a symbol.

How to evaluate Absolute Viscosity using this online evaluator? To use this online evaluator for Absolute Viscosity, enter Fluid Velocity (V), Pipe Diameter (D), Fluid Density (ρ) & Reynolds Number (R) and hit the calculate button.

FAQs on Absolute Viscosity

What is the formula to find Absolute Viscosity?

The formula of Absolute Viscosity is expressed as Absolute Fluid Viscosity = (Fluid Velocity*Pipe Diameter*Fluid Density)/Reynolds Number. Here is an example- 3 = (300*0.05*1000)/5000.

How to calculate Absolute Viscosity?

With Fluid Velocity (V), Pipe Diameter (D), Fluid Density (ρ) & Reynolds Number (R) we can find Absolute Viscosity using the formula - Absolute Fluid Viscosity = (Fluid Velocity*Pipe Diameter*Fluid Density)/Reynolds Number.

Can the Absolute Viscosity be negative?

No, the Absolute Viscosity, measured in Dynamic Viscosity cannot be negative.

Which unit is used to measure Absolute Viscosity?

Absolute Viscosity is usually measured using the Pascal Second[Pa*s] for Dynamic Viscosity. Newton Second per Square Meter[Pa*s], Millinewton Second per Square Meter[Pa*s], Dyne Second per Square Centimeter[Pa*s] are the few other units in which Absolute Viscosity can be measured.

Let Others Know

✖

Facebook

Twitter

Copied!

: Value
: Unit

Absolute Viscosity Formula

Absolute Viscosity Example

Absolute Viscosity Solution

Absolute Viscosity Formula Elements

Other formulas in Flow Measurement category

How to Evaluate Absolute Viscosity?

FAQs on Absolute Viscosity

Variable Name