WAS Pumping Rate from Return Line mlss in Design of a Complete Mix Activated Sludge Reactor Formulas

WAS Pumping Rate from Return Line mlss is the flow rate of waste sludge from the return line. And is denoted by Q. WAS Pumping Rate from Return Line mlss is usually measured using the Cubic Meter per Day for Volumetric Flow Rate. Note that the value of WAS Pumping Rate from Return Line mlss is always positive. Typically, the value of WAS Pumping Rate from Return Line mlss is greater than 0.

Design of a Complete Mix Activated Sludge Reactor formulas that make use of WAS Pumping Rate from Return Line mlss

fxMixed Liquor Suspended Solids given Wasting Rate from Return LineGo

fxMLSS using Wasting Rate from Return Line when Concentration of Solid in Effluent is LowGo

fxMLSS given RAS Pumping Rate from Aeration TankGo

FAQ

What is the WAS Pumping Rate from Return Line mlss?

WAS Pumping Rate from Return Line mlss is the flow rate of waste sludge from the return line. WAS Pumping Rate from Return Line mlss is usually measured using the Cubic Meter per Day for Volumetric Flow Rate. Note that the value of WAS Pumping Rate from Return Line mlss is always positive. Typically, the value of WAS Pumping Rate from Return Line mlss is greater than 0.

Can the WAS Pumping Rate from Return Line mlss be negative?

No, the WAS Pumping Rate from Return Line mlss, measured in Volumetric Flow Rate cannot be negative.

What unit is used to measure WAS Pumping Rate from Return Line mlss?

WAS Pumping Rate from Return Line mlss is usually measured using the Cubic Meter per Day[m³/d] for Volumetric Flow Rate. Cubic Meter per Second[m³/d], Cubic Meter per Hour[m³/d], Cubic Meter per Minute[m³/d] are the few other units in which WAS Pumping Rate from Return Line mlss can be measured.

Let Others Know

✖

Facebook

Twitter

Copied!