WAS Pumping Rate from Reactor in Design of a Complete Mix Activated Sludge Reactor Formulas

WAS Pumping Rate from Reactor is the total amount of waste activated sludge that comes out from the reactor. And is denoted by Q_w. WAS Pumping Rate from Reactor is usually measured using the Cubic Meter per Day for Volumetric Flow Rate. Note that the value of WAS Pumping Rate from Reactor is always positive. Typically, the value of WAS Pumping Rate from Reactor is greater than 0.

Formulas to find WAS Pumping Rate from Reactor in Design of a Complete Mix Activated Sludge Reactor

fxWAS Pumping Rate from Return Line given Wasting Rate from Return LineGo

fxWAS Pumping Rate using Wasting Rate from Return Line when Concentration of Solid in Effluent is LowGo

fxWAS Pumping Rate from Aeration TankGo

fxWAS Pumping Rate from Return Line given RAS Pumping Rate from Aeration TankGo

Design of a Complete Mix Activated Sludge Reactor formulas that make use of WAS Pumping Rate from Reactor

fxVolume of Reactor given WAS Pumping Rate from Aeration TankGo

List of variables in Design of a Complete Mix Activated Sludge Reactor formulas

fx Reactor Volume Go

fx MLSS Go

fx Mean Cell Residence Time Go

fx Sludge Concentration in Return Line Go

fx Effluent Flow Rate Go

fx Solid Concentration in Effluent Go

fx Average Daily Influent Flow Rate Go

fx Return Activated Sludge Go

FAQ

What is the WAS Pumping Rate from Reactor?

WAS Pumping Rate from Reactor is the total amount of waste activated sludge that comes out from the reactor. WAS Pumping Rate from Reactor is usually measured using the Cubic Meter per Day for Volumetric Flow Rate. Note that the value of WAS Pumping Rate from Reactor is always positive. Typically, the value of WAS Pumping Rate from Reactor is greater than 0.

Can the WAS Pumping Rate from Reactor be negative?

No, the WAS Pumping Rate from Reactor, measured in Volumetric Flow Rate cannot be negative.

What unit is used to measure WAS Pumping Rate from Reactor?

WAS Pumping Rate from Reactor is usually measured using the Cubic Meter per Day[m³/d] for Volumetric Flow Rate. Cubic Meter per Second[m³/d], Cubic Meter per Hour[m³/d], Cubic Meter per Minute[m³/d] are the few other units in which WAS Pumping Rate from Reactor can be measured.

Let Others Know

✖

Facebook

Twitter

Copied!