Static Viscosity in Boundary Layer Equations for Hypersonic Flow Formulas

Static viscosity, is the viscosity of continuous flow, viscosity measures the ratio of the viscous force to the inertial force on the fluid. And is denoted by μe. Static Viscosity is usually measured using the Poise for Dynamic Viscosity. Note that the value of Static Viscosity is always positive.

Formulas to find Static Viscosity in Boundary Layer Equations for Hypersonic Flow

fxStatic Viscosity Relation using Temperature of WallGo

Boundary Layer Equations for Hypersonic Flow formulas that make use of Static Viscosity

fxLocal Shear Stress at WallGo

fxDynamic Viscosity around WallGo

List of variables in Boundary Layer Equations for Hypersonic Flow formulas

fx Dynamic Viscosity Go

fx Wall Temperature Go

fx Static Temperature Go

fx Constant n Go

FAQ

What is the Static Viscosity?

Static viscosity, is the viscosity of continuous flow, viscosity measures the ratio of the viscous force to the inertial force on the fluid. Static Viscosity is usually measured using the Poise for Dynamic Viscosity. Note that the value of Static Viscosity is always positive.

Can the Static Viscosity be negative?

No, the Static Viscosity, measured in Dynamic Viscosity cannot be negative.

What unit is used to measure Static Viscosity?

Static Viscosity is usually measured using the Poise[P] for Dynamic Viscosity. Pascal Second[P], Newton Second per Square Meter[P], Millinewton Second per Square Meter[P] are the few other units in which Static Viscosity can be measured.

Let Others Know

✖

Facebook

Twitter

Copied!