Inside Subcooling Coefficient in Heat Exchangers Formulas

Inside Subcooling Coefficient is the heat transfer coefficient when the condensed vapor is further subcooled to lower temperature in a condenser inside a tube. And is denoted by h_{sc inner}. Inside Subcooling Coefficient is usually measured using the Watt per Square Meter per Kelvin for Heat Transfer Coefficient. Note that the value of Inside Subcooling Coefficient is always positive.

Formulas to find Inside Subcooling Coefficient in Heat Exchangers

fxHeat Transfer Coefficient for Subcooling Inside Vertical TubesGo

List of variables in Heat Exchangers formulas

fx Mass Flowrate in Heat Exchanger Go

fx Fluid Viscosity at Average Temperature Go

fx Pipe Inner Diameter in Exchanger Go

fx Specific Heat Capacity Go

fx Fluid Density in Heat Transfer Go

fx Thermal Conductivity in Heat Exchanger Go

FAQ

What is the Inside Subcooling Coefficient?

Inside Subcooling Coefficient is the heat transfer coefficient when the condensed vapor is further subcooled to lower temperature in a condenser inside a tube. Inside Subcooling Coefficient is usually measured using the Watt per Square Meter per Kelvin for Heat Transfer Coefficient. Note that the value of Inside Subcooling Coefficient is always positive.

Can the Inside Subcooling Coefficient be negative?

No, the Inside Subcooling Coefficient, measured in Heat Transfer Coefficient cannot be negative.

What unit is used to measure Inside Subcooling Coefficient?

Inside Subcooling Coefficient is usually measured using the Watt per Square Meter per Kelvin[W/m²*K] for Heat Transfer Coefficient. Watt per Square Meter per Celcius[W/m²*K], Joule per Second per Square Meter per Kelvin[W/m²*K], Kilocalorie (IT) per Hour per Square Foot per Celcius[W/m²*K] are the few other units in which Inside Subcooling Coefficient can be measured.

Let Others Know

✖

Facebook

Twitter

Copied!