Early Voltage in Signal and IC Amplifiers Formulas

Early voltage is entirely process-technology dependent, with the dimensions of volts per micron.Typically, V<sub>A</sub> falls in the range of 5 V/μm to 50 V/μm. And is denoted by V_e. Early Voltage is usually measured using the Volt Per Micrometer for Electric Field Strength. Note that the value of Early Voltage is always positive.

Signal and IC Amplifiers formulas that make use of Early Voltage

fxIntrinsic Gain of IC AmplifierGo

FAQ

What is the Early Voltage?

Early voltage is entirely process-technology dependent, with the dimensions of volts per micron.Typically, V<sub>A</sub> falls in the range of 5 V/μm to 50 V/μm. Early Voltage is usually measured using the Volt Per Micrometer for Electric Field Strength. Note that the value of Early Voltage is always positive.

Can the Early Voltage be negative?

No, the Early Voltage, measured in Electric Field Strength cannot be negative.

What unit is used to measure Early Voltage?

Early Voltage is usually measured using the Volt Per Micrometer[V/μm] for Electric Field Strength. Volt per Meter[V/μm], Kilovolt per Meter[V/μm], Millivolt per Meter[V/μm] are the few other units in which Early Voltage can be measured.

Let Others Know

✖

Facebook

Twitter

Copied!