Depth of Water in the Pumping Well in Groundwater Hydrology Formulas

The Depth of Water in the Pumping Well refers to the well in which pumping is required to increase the formation pressure to allow the free production flow. And is denoted by h_w. Depth of Water in the Pumping Well is usually measured using the Meter for Length. Note that the value of Depth of Water in the Pumping Well is always negative.

Formulas to find Depth of Water in the Pumping Well in Groundwater Hydrology

fxDepth of Water in Pumping Well when Steady Flow in Unconfined Aquifer is ConsideredGo

Groundwater Hydrology formulas that make use of Depth of Water in the Pumping Well

fxDischarge at Edge of Zone of InfluenceGo

fxSaturated Thickness of Aquifer when Steady Flow of Unconfined Aquifer is ConsideredGo

fxDrawdown at Pumping WellGo

List of variables in Groundwater Hydrology formulas

fx Saturated Thickness of the Aquifer Go

fx Steady Flow of an Unconfined Aquifer Go

fx Radius at the Edge of Zone of Influence Go

fx Radius of the Pumping Well Go

fx Coefficient of Permeability Go

FAQ

What is the Depth of Water in the Pumping Well?

The Depth of Water in the Pumping Well refers to the well in which pumping is required to increase the formation pressure to allow the free production flow. Depth of Water in the Pumping Well is usually measured using the Meter for Length. Note that the value of Depth of Water in the Pumping Well is always negative.

Can the Depth of Water in the Pumping Well be negative?

Yes, the Depth of Water in the Pumping Well, measured in Length can be negative.

What unit is used to measure Depth of Water in the Pumping Well?

Depth of Water in the Pumping Well is usually measured using the Meter[m] for Length. Millimeter[m], Kilometer[m], Decimeter[m] are the few other units in which Depth of Water in the Pumping Well can be measured.

Let Others Know

✖

Facebook

Twitter

Copied!