Assumed Speed Brake Application Speed in Taxiway and Exit Taxiway Design Formulas

Assumed Speed Brake Application Speed. Brake application pressure is the same as control pressure, which is the pressure of application air by the foot valve or other. And is denoted by V_ba. Assumed Speed Brake Application Speed is usually measured using the Meter per Second for Speed. Note that the value of Assumed Speed Brake Application Speed is always negative.

Formulas to find Assumed Speed Brake Application Speed in Taxiway and Exit Taxiway Design

fxAssumed Brake Application Speed given Distance for Deceleration in Normal Braking ModeGo

Taxiway and Exit Taxiway Design formulas that make use of Assumed Speed Brake Application Speed

fxDistance required for Deceleration in normal Braking modeGo

fxNominal Turn-Off Speed given Distance for Deceleration in Normal Braking ModeGo

fxDeceleration Rate when Distance for Deceleration in Normal Braking ModeGo

List of variables in Taxiway and Exit Taxiway Design formulas

fx Distance for Deceleration in Normal Breaking Mode Go

fx Deceleration Go

fx Nominal Turn-off Speed Go

FAQ

What is the Assumed Speed Brake Application Speed?

Assumed Speed Brake Application Speed. Brake application pressure is the same as control pressure, which is the pressure of application air by the foot valve or other. Assumed Speed Brake Application Speed is usually measured using the Meter per Second for Speed. Note that the value of Assumed Speed Brake Application Speed is always negative.

Can the Assumed Speed Brake Application Speed be negative?

Yes, the Assumed Speed Brake Application Speed, measured in Speed can be negative.

What unit is used to measure Assumed Speed Brake Application Speed?

Assumed Speed Brake Application Speed is usually measured using the Meter per Second[m/s] for Speed. Meter per Minute[m/s], Meter per Hour[m/s], Kilometer per Hour[m/s] are the few other units in which Assumed Speed Brake Application Speed can be measured.

Let Others Know

✖

Facebook

Twitter

Copied!